2013/4/15 jeremy youngs <jcyoung...@gmail.com> > on the torch head , touch off in a corner on 2 pads run 5 v to torch head > and a debounce buffer then just touch off . should be more than sufficent > for a plasma table , if a thc is used could just use the touch off pin > output no??
Well, if I understand Your correctly, You are suggesting manual touch-off procedure. What I meant something that LinuxCNC would do on its own, just like usual homing - just press the button. With manual touch off also jogging into limit switches would do the trick. One could wire both limit switches in series and link to motion.probe-input and then do probing move along each axis. Creating vcp button to do this for each axis is simple. -- Viesturs If you can't fix it, you don't own it. http://www.ifixit.com/Manifesto ------------------------------------------------------------------------------ Precog is a next-generation analytics platform capable of advanced analytics on semi-structured data. The platform includes APIs for building apps and a phenomenal toolset for data science. Developers can use our toolset for easy data analysis & visualization. Get a free account! http://www2.precog.com/precogplatform/slashdotnewsletter _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
