On Friday 21 June 2013 17:38:40 Jon Elson did opine: > Gene Heskett wrote: > > I have two of those D525MW boards. I had to reflash the bios straight > > away, but I haven't had any parport problems using the default configs > > for the parport in Linuxcnc since. The latest bios flash for those > > boards might actually fix it. YMMV of course. > > Most of the LinuxCNC drivers that use the EPP mode handle this problem > in the driver, so the user never sees the problem. My little pcisetup > program > has essentially been incorporated into the drivers for Pico Systems and > Mesa boards, at least. BUT, to use other software, such as my > diagnostic programs, you do need the pcisetup program on those > computers with the BIOS problem. > > Jon
Thanks Jon. I grabbed a copy just in case. :) Cheers, Gene -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) My web page: <http://coyoteden.dyndns-free.com:85/gene> is up! My views <http://www.armchairpatriot.com/What%20Has%20America%20Become.shtml> [Sir Stafford Cripps] has all the virtues I dislike and none of the vices I admire. -- Winston Churchill A pen in the hand of this president is far more dangerous than 200 million guns in the hands of law-abiding citizens. ------------------------------------------------------------------------------ This SF.net email is sponsored by Windows: Build for Windows Store. http://p.sf.net/sfu/windows-dev2dev _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
