On 06/30/2013 02:34 PM, Charles Steinkuehler wrote: > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA1 > > I'd love to buy it, but there is no actual contact info in the > craigslist posting, I have received no response to e-mail to the > one-off craigslist e-mail address, and all identifying meta-data was > stripped from the jpeg photos (so no GPS or anything). :( > > I'm still somewhat hoping to get an e-mail out of the blue, but at > this point I'm not holding my breath. > > On 6/30/2013 4:24 PM, Dave wrote: >> I didn't notice that. I have an Erikson QC 30 on my Bridgeport II >> and it is nice.
Just in case, see Quick-Change (not Quick-Switch) here: http://www.tools-n-gizmos.com/specs/Tapers.html My mill appears to have the same head, but uses NMTB 40 tools with a power draw bar. My take on some of the chatter I've seen on forums is that when the Quick-xxx nuts get worn, tools are hard to lock and can fall out in dramatic fashion. http://www.ebay.com/itm/290928102085 http://www.ebay.com/itm/330945298681 -- Kirk Wallace http://www.wallacecompany.com/machine_shop/ http://www.wallacecompany.com/E45/ ------------------------------------------------------------------------------ This SF.net email is sponsored by Windows: Build for Windows Store. http://p.sf.net/sfu/windows-dev2dev _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
