On 07/05/2013 05:13 PM, andy pugh wrote: > On 6 July 2013 00:29, Kirk Wallace <kwall...@wallacecompany.com> wrote: >> I need to output quadrature stepping from a 6i25. > > Do you mean 6i25? > > There are many 6i25 firmwares that output step pulses, those are > always FPGA-sourced rather than daughterboard sourced. > > The standard 7i76 firmware will be stepping furiously on the pins > described in dmesg. >
Hello Andy. I have a 6i25 without any daughter boards. I want to use it to provide A, B, and Z signals to test an encoder input circuit. When I looked at the Hostmot2 Stepgen, step/dir was the only output type. The software Stepgen component has a wide range of output types, but is too slow. -- Kirk Wallace http://www.wallacecompany.com/machine_shop/ http://www.wallacecompany.com/E45/ ------------------------------------------------------------------------------ This SF.net email is sponsored by Windows: Build for Windows Store. http://p.sf.net/sfu/windows-dev2dev _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users