On Sat, Jul 6, 2013 at 7:37 PM, Florian Rist <fr...@fs.tum.de> wrote: > Hi, > I'm looking for a simulation software that allows to simulate 5axis > material removal, that is at best open source and hast be not expensive. > > If this does not exist I'm thinking about writing one. The geometry part > of it is not so much of a problem (as long as it does not have to be > efficient) but the G-Code interpretation is. Is there a way to use > LinuxCNC as an interpreter to get xyzabc coordinate every so and so > millimeter or degree? >
What would be nice... modify vismach in linuxcnc to show stock and allow cutting (graphic subtraction) so part of the work you want is already there Dave Caroline > > By the way I know about these simulators, has any one used one of these? > > Free (but from 2004): > > http://5axes.free.fr/index.htm > > The sources should be out there, but I was not able to find it yet. > > > Expensive: > > http://www.springplm.com/contenu.php?ID=460 > http://www.moduleworks.com/ > > > See you > Flo > > ------------------------------------------------------------------------------ > This SF.net email is sponsored by Windows: > > Build for Windows Store. > > http://p.sf.net/sfu/windows-dev2dev > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ This SF.net email is sponsored by Windows: Build for Windows Store. http://p.sf.net/sfu/windows-dev2dev _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
