On 8/7/2013 3:24 AM, Sven Wesley wrote: > 2013/8/6 Dave<e...@dc9.tzo.com> > > >> ... >> >> Here is some free motor sizing software that seems to be quite >> accurate. A number of Servo drive companies use this software and they >> brand label it.. >> http://visualsizer.com/ >> >> It is entirely free. >> >> I have used the Visual Sizer XP for years and it is really good but >> takes some effort to figure out how to run it even though it is very >> graphical. >> >> ... >> Dave >> >> >> > i did try it out but there's something that I miss. I tried a 10 m/min > calculation with a 5 mm pitch screw and it ended up with a needed RPM from > motor at 60.69 RPM... > > /S > >
The software does take a little while to figure out. If you get stuck, post the configuration somewhere and I will download it and take a look at it. The workflow on how to make that application do what you want is not entirely obvious. Dave ------------------------------------------------------------------------------ Get 100% visibility into Java/.NET code with AppDynamics Lite! It's a free troubleshooting tool designed for production. Get down to code-level detail for bottlenecks, with <2% overhead. Download for free and get started troubleshooting in minutes. http://pubads.g.doubleclick.net/gampad/clk?id=48897031&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
