Dear Peter, continuing the topic, could you please help me to update firmware (in case they need one) of the boards I have: 3x 5i23 6x 8i20 1x 7i49 1x 5i25 1x 7i77 1x 7i37 a lot of 7i39-HV
I can give you remote access to my PCs. What tools do you prefer? I can run TeamViewer for example.. What I am working now on and met a problem is a setup of 5i23, 7i44, 7i49, 7i37 and 6x 8i20. This is what I started to write you as I went through 8i20 update way: To help make your README and update tools better: Change sudo ./installss to sudo ./ssinstall You can put a note about path and making ssinstall executable Change /bin to /lib inside ssinstall Write where to find host FPGA firmware sserial version (I don't know) You could note / put a link to info what is master version of LinuxCNC Note about executable for update* files Note that user has to specify path to firmware file or copy it or script to one dir. Or change the script to take firmware from default location. And then I stopped at: [ 7317.595333] hm2: loading Mesa HostMot2 driver version 0.15 [ 7317.599591] hm2_pci: loading Mesa AnyIO HostMot2 driver version 0.7 [ 7317.599653] hm2_pci 0000:01:06.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 7317.599659] hm2_pci: discovered 5i23 at 0000:01:06.0 [ 7317.599743] hm2_5i23.0: firmware: requesting hm2/5i23/rmsvss6_8.bit [ 7317.858875] hm2/hm2_5i23.0: Smart Serial Firmware Version 31 [ 7317.858884] hm2/hm2_5i23.0: Setting baudrate is not supported in the current firmware version [ 7317.858887] Version must be > v33 and you have version 31.hm2/hm2_5i23.0: failed to parse Module Descriptor 4 I tried to run SC9054W.exe for 5i23. Drivers do not install on Win7 64. And SC9054W.exe does not run on WinXP 32. And I don't know where to get new sserial firmware files. On 08/09/2013 12:24 AM, Peter C. Wallace wrote: > On Thu, 8 Aug 2013, propcoder wrote: > >> Date: Thu, 08 Aug 2013 16:01:54 +0300 >> From: propcoder <marius.alks...@gmail.com> >> Reply-To: "Enhanced Machine Controller (EMC)" >> <emc-users@lists.sourceforge.net> >> To: emc-users@lists.sourceforge.net >> Subject: Re: [Emc-users] MESA 8i20 and enable signal >> >> Peter, I am looking forward on getting one (together with brief update > instructions). > > www.mesanet.com/software/parallel/sserial.zip > Has the latest 8I20 firmware (R11) > > You will need LinuxCNC master and a sserial FPGA bitfile with a version of > SSLBP newer than rev 33 to update via linuxcnc/standard bitfile/daughtercard > /cables (update in place) using setsserial (take a look at the README file in > utils/linuxcnc) > > You can also update the firmware using the windows utility uflbp and a > USB/serial adapter > > > Also note that the RPD/WPD utilities in the sserial.zip file > are not for the 8I20 > > ------------------------------------------------------------------------------ Get 100% visibility into Java/.NET code with AppDynamics Lite! It's a free troubleshooting tool designed for production. Get down to code-level detail for bottlenecks, with <2% overhead. Download for free and get started troubleshooting in minutes. http://pubads.g.doubleclick.net/gampad/clk?id=48897031&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
