Thanks, but Rob did the conversion last night and now I'm adding metric fine and metric coarse to it.
The metric side will need to be checked for accuracy as soon as I'm done. JT On 8/14/2013 5:34 AM, Marius Liebenberg wrote: > JT > What is the correct way to calculate the drill sizes please. I will do > the metric table but I just need to know what is the right way. > > On 2013/08/13 04:30 PM, John Thornton wrote: >> Oh I forgot to mention I converted the first line of each type of tap as >> an example. >> >> JT >> >> On 8/13/2013 9:03 AM, Dave wrote: >>> Very nice John.. >>> >>> Dave Cole >>> >>> On 8/13/2013 9:32 AM, John Thornton wrote: >>>> I know most of you guys on the mailing list don't visit the forum so >>>> here is a link to a G code generator for drilling and tapping holes on a >>>> mill. I wrote this mainly because we don't have a tapping cycle and if I >>>> forgot the pre-position move then you get a really neat show as your tap >>>> traverses from where it is to the bottom of the hole. Anyone ever seen a >>>> tapped slot? >>>> >>>> This saves me time when I need to tap some holes in a part and helps >>>> prevent errors. >>>> >>>> http://linuxcnc.org/index.php/english/forum/31-cad-cam/26859-mill-tapping-g-code-generator >>>> >>>> JT >>>> >>>> ------------------------------------------------------------------------------ >>>> Get 100% visibility into Java/.NET code with AppDynamics Lite! >>>> It's a free troubleshooting tool designed for production. >>>> Get down to code-level detail for bottlenecks, with<2% overhead. >>>> Download for free and get started troubleshooting in minutes. >>>> http://pubads.g.doubleclick.net/gampad/clk?id=48897031&iu=/4140/ostg.clktrk >>>> _______________________________________________ >>>> Emc-users mailing list >>>> Emc-users@lists.sourceforge.net >>>> https://lists.sourceforge.net/lists/listinfo/emc-users >>>> >>>> >>> ------------------------------------------------------------------------------ >>> Get 100% visibility into Java/.NET code with AppDynamics Lite! >>> It's a free troubleshooting tool designed for production. >>> Get down to code-level detail for bottlenecks, with <2% overhead. >>> Download for free and get started troubleshooting in minutes. >>> http://pubads.g.doubleclick.net/gampad/clk?id=48897031&iu=/4140/ostg.clktrk >>> _______________________________________________ >>> Emc-users mailing list >>> Emc-users@lists.sourceforge.net >>> https://lists.sourceforge.net/lists/listinfo/emc-users >> ------------------------------------------------------------------------------ >> Get 100% visibility into Java/.NET code with AppDynamics Lite! >> It's a free troubleshooting tool designed for production. >> Get down to code-level detail for bottlenecks, with <2% overhead. >> Download for free and get started troubleshooting in minutes. >> http://pubads.g.doubleclick.net/gampad/clk?id=48897031&iu=/4140/ostg.clktrk >> _______________________________________________ >> Emc-users mailing list >> Emc-users@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/emc-users >> ------------------------------------------------------------------------------ Get 100% visibility into Java/.NET code with AppDynamics Lite! It's a free troubleshooting tool designed for production. Get down to code-level detail for bottlenecks, with <2% overhead. Download for free and get started troubleshooting in minutes. http://pubads.g.doubleclick.net/gampad/clk?id=48897031&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
