Hi, I've set up a BeagleBone Black (BBB) with MachineKit for BeBoPr with a Bridge (jumper wires straight from the BBB headers, no actual BeBoPr or bridge). I am running the BBB headless through a wired network with the main display on a Windows XP machine using Xming which starts xterm using PuTTY (plink.exe). I then run linuxcnc from there. So far everything works reasonably well, but I would like to use AXIS to open and then run CAD files that are shared on the WinXP machine through the network, rather than those on the BBBs internal drive. The Xfce environment the MachineKit uses does not seem to have a network manager or the ability to 'see' the XP computer that is running the display.
Does anyone have suggestions on how to give the Linux Xfce package network capabilities that will allow access to the LAN and the shared files on the XP machine? Thanks, Jeff ------------------------------------------------------------------------------ Introducing Performance Central, a new site from SourceForge and AppDynamics. Performance Central is your source for news, insights, analysis and resources for efficient Application Performance Management. Visit us today! http://pubads.g.doubleclick.net/gampad/clk?id=48897511&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
