On 9/3/2013 3:10 PM, Bob Weiss wrote: > Ok, I got it into World mode and my next issue is I tried to issue the > command: G0 Z10 and G0 Z-10 and it gives me an error saying the command > would put the axis past its postive limit. It said this 3 times for each > axis > > After homeing the machine and switching to World mode it made X and Y 0.0 > but changed Z to -278.00 ? Not sure where it got that value from for Z? > > I was able to do G0 X10 Y10 before the command above and it seemed to move > the 3 axis properly to that position. Its just the Z command isn't moving > anything?
I don't have much to add, but if you have the time, please take some notes on the issues that give you problems. You're way ahead of me on getting the delta kinematics going, and you are one of the first folks getting into using LinuxCNC with a 3D printer who was not already at least somewhat familiar with CNC controls (LinuxCNC or others). Your experiences and impressions will help make it easier for other new users. Even if you don't have time to do a full write up, if you send me your "gotchas", I'll at least make a FAQ or "watch out for..." page on my blog. Thanks! Oh...and remember: http://www.despair.com/mistakes.html :) -- Charles Steinkuehler [email protected]
signature.asc
Description: OpenPGP digital signature
------------------------------------------------------------------------------ Learn the latest--Visual Studio 2012, SharePoint 2013, SQL 2012, more! Discover the easy way to master current and previous Microsoft technologies and advance your career. Get an incredible 1,500+ hours of step-by-step tutorial videos with LearnDevNow. Subscribe today and save! http://pubads.g.doubleclick.net/gampad/clk?id=58040911&iu=/4140/ostg.clktrk
_______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
