On 09/03/2013 08:26 AM, Michael Haberler wrote: > how to try it > =============== > we do not have packages as of yet - you need to build from source. Whatever > kernel you happen to be running is fine if you have the linux-headers pkg > installed. > > Follow the steps outlined in section 3 to build: > http://static.mah.priv.at/public/html/common/UnifiedBuild.html#_installation > , then run your configuration as usual.
Hi All I tried to build "Unified Build" LinuxCNC on Ubuntu 13.04 (Linux 3.8.0-30-generic) and Ubuntu 12.04 (Linux 3.2.0-53-generic). Both boxes fully updated. I got the same error on both machines after I run ./configure: checking libgl1-mesa-dri workaround... test for libgl1-mesa-dri workaround failed, please file a bug A quick google didn't found something useful to solve this. Anyone knows how to solve this error? One side note: I had to install git and autoconf to get to the ./configure state. This section: 3.2. Packages required, Install the following packages: could be extended to: $ sudo apt-get install libudev-dev libmodbus-dev libboost-python-dev git autoconf Thomas ------------------------------------------------------------------------------ How ServiceNow helps IT people transform IT departments: 1. Consolidate legacy IT systems to a single system of record for IT 2. Standardize and globalize service processes across IT 3. Implement zero-touch automation to replace manual, redundant tasks http://pubads.g.doubleclick.net/gampad/clk?id=51271111&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
