Hi, It is a little bit more complicated... i just realized that the old config is made with 2.4 and the old hal_joypad (?) thing. The link below i allready found, but just change the name didnt worked because some of the names of the input chanels are different or do not work as expected on the xbox controler. so i opened up the manual and hal monitor and currently writing my own one. I will send the results here, so maybe someone can need it.
-sebastian On Sun, 3 Nov 2013 20:45:18 +0000, andy pugh <[email protected]> wrote: > On 3 November 2013 12:27, Sebastian Bachmann <[email protected]> wrote: > >> We had a Logitech pad on our linuxcnc driven cnc but that unfortunately >> broke... now we bought a xbox 360 usb gamepad and the config we used >> before does not work anymore. >> does anybody has a working config laying around we could use? I would be >> very thankful :) > > Even if they have, it might not work exactly as you want. > You probably only need to change the device name in the > loadusr.....hal_input.... line in the HAL file. > Steps 1,2,3 here: > http://wiki.linuxcnc.org/cgi-bin/wiki.pl?Simple_Remote_Pendant ------------------------------------------------------------------------------ Android is increasing in popularity, but the open development platform that developers love is also attractive to malware creators. Download this white paper to learn more about secure code signing practices that can help keep Android apps secure. http://pubads.g.doubleclick.net/gampad/clk?id=65839951&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
