On 12/07/2013 11:34 PM, Gene Heskett wrote: > I did not mention sound cards, thats a whole nother can of > worms, and that situation seems about as foggy as ever. > True hardware cards like the Audigy2 Value are way too > hard to find. And software cards are probably going to > effect the linuxcnc latency readings, sometimes a lot, so > I wouldn't figure on listening to music on the same box > that carves metal. Some of the carving might be a bit > funkity. So I don't have any speakers or amps plugged into > the carving hardware, and if I happen to note that drivers > are being loaded at bootup, I've been known to blacklist > them in /etc/modules/blacklist. But thats something the > individual motherboard model may or may not need. No, this is a non-RT system that I do all my development on, not the CNC machine.
Jon ------------------------------------------------------------------------------ Sponsored by Intel(R) XDK Develop, test and display web and hybrid apps with a single code base. Download it for free now! http://pubads.g.doubleclick.net/gampad/clk?id=111408631&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
