On 9 December 2013 13:38, Charles Steinkuehler <char...@steinkuehler.net> wrote:
> Yes, "Leveling" the bed on the Simpson is easy...what I expect will be > hard is getting the plane of the physical bed to exactly match up with > the XY plane of the arm movement. It looks like it should be easy. But I might be missing something. I would be jogging the nozzle as close to one bolt as possible, adjusting that corner of the bed to a fixed height below the nozzle (probably using a 7th extra nut as the gauge), then jogging to each of the other corners and repeating, followed by a check in the centre. I am pleased to see the development of fully printable printers. I winder if it is feasible to print drive-belts? -- atp If you can't fix it, you don't own it. http://www.ifixit.com/Manifesto ------------------------------------------------------------------------------ Sponsored by Intel(R) XDK Develop, test and display web and hybrid apps with a single code base. Download it for free now! http://pubads.g.doubleclick.net/gampad/clk?id=111408631&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
