On 28 Dec 2013, at 17:26, Charles Steinkuehler <[email protected]> wrote:
> On 12/28/2013 10:17 AM, Bas de Bruijn wrote: >> Hi All, >> >> Having a working BBB + BeBoPr-Bridge system, Analog inputs working >> correctly, and manually moving X, Y and Z axes I would like to >> install the linear delta kinematics. >> >> So I did a git Pull to get the latest and after that fetched the >> /jepler/lineardeltakins branch. >> >> I copied the configs/ARM/ and subfolders from the MachineKit-ubc >> branch to the jepler/lineardeltakins branch. >> >> so far so good so switching to the /jepler/lineardeltakins branch I >> can start the BeBoPr-Bridge configuration, working motors, all good > > I recommend using the combined ubc+ja4 branch, which is what I'm working > on for my non-Cartesian systems (including a linear delta machine): > > https://github.com/mhaberler/linuxcnc/tree/unified-build-candidate-3-joints_axes4 > > The lineardeltakins module is already in this branch, you just have to > select it in your configuration file. first after making my local branch from https://github.com/mhaberler/linuxcnc/tree/unified-build-candidate-3-joints_axes4 linuxcnc wouldn’t start and generated the following messages: RTAPI configuration file unreadable: /home/linuxcnc/linuxcnc/etc/linuxcnc/rtapi.ini Config file tool unusable: /home/linuxcnc/linuxcnc/libexec/inivar After copying the folders /etc and /libexec from the MachineKit-ubc branch these errors were solved and instead I got the same messages as the initial error messages at the initial post. should I have done something different? but….. the motors switch on after Loading cape-bone-iio overlay now none of my branches will work :( After getting the dmesg information I seems this one is out of place, but I’d rather have an expert opinion. [ 107.079712] omap_hwmod: pruss: failed to hardreset linuxcnc@arm:~$ dmesg [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.8.13xenomai-bone26.1 (root@mah2) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Tue Aug 27 22:10:05 CEST 2013 [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine: Generic AM33XX (Flattened Device Tree), model: TI AM335x BeagleBone [ 0.000000] Memory policy: ECC disabled, Data cache writeback [ 0.000000] On node 0 totalpages: 130816 [ 0.000000] free_area_init_node: node 0, pgdat c0a57340, node_mem_map c0b39000 [ 0.000000] Normal zone: 1024 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 129792 pages, LIFO batch:31 [ 0.000000] AM335X ES1.0 (neon ) [ 0.000000] PERCPU: Embedded 11 pages/cpu @c0f49000 s23552 r8192 d13312 u45056 [ 0.000000] pcpu-alloc: s23552 r8192 d13312 u45056 alloc=11*4096 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129792 [ 0.000000] Kernel command line: console=ttyO0,115200n8 capemgr.disable_partno=BB-BONELT-HDMI,BB-BONE-EMMC-2G,cape-bebopr-brdg root=/dev/mmcblk0p2 ro rootfstype=ext4 rootwait fixrtc ip= [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] __ex_table already sorted, skipping sort [ 0.000000] allocated 1048576 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Memory: 511MB = 511MB total [ 0.000000] Memory: 503204k/503204k available, 21084k reserved, 0K highmem [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xe0800000 - 0xff000000 ( 488 MB) [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc0984b6c (9715 kB) [ 0.000000] .init : 0xc0985000 - 0xc09d5c00 ( 323 kB) [ 0.000000] .data : 0xc09d6000 - 0xc0a5a300 ( 529 kB) [ 0.000000] .bss : 0xc0a5a300 - 0xc0b382c0 ( 888 kB) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts [ 0.000000] Total of 128 interrupts on 1 active controller [ 0.000000] OMAP clockevent source: GPTIMER1 at 24000000 Hz [ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms [ 0.000000] I-pipe, 24.000 MHz clocksource [ 0.000000] OMAP clocksource: GPTIMER2 at 24000000 Hz [ 0.000000] Interrupt pipeline (release #1) [ 0.000000] Console: colour dummy device 80x30 [ 0.000823] Calibrating delay loop... 663.07 BogoMIPS (lpj=647168) [ 0.035032] pid_max: default: 32768 minimum: 301 [ 0.035207] Security Framework initialized [ 0.035278] Mount-cache hash table entries: 512 [ 0.041524] Initializing cgroup subsys cpuacct [ 0.041552] Initializing cgroup subsys memory [ 0.041597] Initializing cgroup subsys blkio [ 0.041704] CPU: Testing write buffer coherency: ok [ 0.042145] CPU0: thread -1, cpu 0, socket -1, mpidr 0 [ 0.042202] Setting up static identity map for 0x8069e448 - 0x8069e4a0 [ 0.043377] Brought up 1 CPUs [ 0.043394] SMP: Total of 1 processors activated (663.07 BogoMIPS). [ 0.044474] devtmpfs: initialized [ 0.102701] pinctrl core: initialized pinctrl subsystem [ 0.102867] rstctl core: initialized rstctl subsystem [ 0.103235] regulator-dummy: no parameters [ 0.103642] NET: Registered protocol family 16 [ 0.104248] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.110071] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568 [ 0.110561] platform 49000000.edma: alias fck already exists [ 0.110580] platform 49000000.edma: alias fck already exists [ 0.110595] platform 49000000.edma: alias fck already exists [ 0.111378] gpiochip_add: registered GPIOs 0 to 31 on device: gpio [ 0.111498] OMAP GPIO hardware version 0.1 [ 0.112445] gpiochip_add: registered GPIOs 32 to 63 on device: gpio [ 0.113316] gpiochip_add: registered GPIOs 64 to 95 on device: gpio [ 0.114111] gpiochip_add: registered GPIOs 96 to 127 on device: gpio [ 0.114438] of_get_named_gpio_flags exited with status 52 [ 0.114459] gpio-rctrl rstctl.3: loaded OK [ 0.117866] hw-breakpoint: debug architecture 0x4 unsupported. [ 0.119265] cpsw.0: No hwaddr in dt. Using c8:a0:30:aa:3c:49 from efuse [ 0.119289] cpsw.1: No hwaddr in dt. Using c8:a0:30:aa:3c:4b from efuse [ 0.128727] bio: create slab <bio-0> at 0 [ 0.135936] edma-dma-engine edma-dma-engine.0: TI EDMA DMA engine driver [ 0.136098] of_get_named_gpio_flags: can't parse gpios property [ 0.136238] vmmcsd_fixed: 3300 mV [ 0.137976] SCSI subsystem initialized [ 0.138263] usbcore: registered new interface driver usbfs [ 0.138331] usbcore: registered new interface driver hub [ 0.138623] usbcore: registered new device driver usb [ 0.140026] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 0.141246] input: tps65217_pwr_but as /devices/ocp.2/44e0b000.i2c/i2c-0/0-0024/input/input0 [ 0.142691] DCDC1: at 1500 mV [ 0.143612] vdd_mpu: 925 <--> 1325 mV at 1325 mV [ 0.144539] vdd_core: 925 <--> 1150 mV at 1125 mV [ 0.145410] LDO1: at 1800 mV [ 0.146269] LDO2: at 3300 mV [ 0.147926] LDO3: 1800 mV [ 0.148885] LDO4: at 3300 mV [ 0.149689] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 0.150325] omap_i2c 44e0b000.i2c: unable to select pin group [ 0.150923] omap_i2c 4819c000.i2c: bus 1 rev0.11 at 100 kHz [ 0.152752] omap_i2c 4819c000.i2c: unable to select pin group [ 0.152918] media: Linux media interface: v0.10 [ 0.152986] Linux video capture interface: v2.00 [ 0.153090] pps_core: LinuxPPS API ver. 1 registered [ 0.153100] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]> [ 0.153569] Advanced Linux Sound Architecture Driver Initialized. [ 0.154419] NetLabel: Initializing [ 0.154433] NetLabel: domain hash size = 128 [ 0.154441] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.154517] NetLabel: unlabeled traffic allowed by default [ 0.154768] Switching to clocksource ipipe_tsc [ 0.190287] NET: Registered protocol family 2 [ 0.191012] TCP established hash table entries: 4096 (order: 3, 32768 bytes) [ 0.191097] TCP bind hash table entries: 4096 (order: 4, 81920 bytes) [ 0.191189] TCP: Hash tables configured (established 4096 bind 4096) [ 0.191261] TCP: reno registered [ 0.191278] UDP hash table entries: 256 (order: 1, 12288 bytes) [ 0.191305] UDP-Lite hash table entries: 256 (order: 1, 12288 bytes) [ 0.191578] NET: Registered protocol family 1 [ 0.192139] RPC: Registered named UNIX socket transport module. [ 0.192153] RPC: Registered udp transport module. [ 0.192161] RPC: Registered tcp transport module. [ 0.192168] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.192448] Trying to unpack rootfs image as initramfs... [ 0.400540] Freeing initrd memory: 2904K [ 0.401192] CPU PMU: probing PMU on CPU 0 [ 0.401217] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available [ 0.401645] omap2_mbox_probe: platform not supported [ 0.563205] I-pipe: head domain Xenomai registered. [ 0.563238] Xenomai: hal/arm started. [ 0.564328] Xenomai: scheduling class idle registered. [ 0.564350] Xenomai: scheduling class rt registered. [ 0.569366] Xenomai: real-time nucleus v2.6.2.1 (Day At The Beach) loaded. [ 0.569377] Xenomai: debug mode enabled. [ 0.569809] Xenomai: starting native API services. [ 0.569823] Xenomai: starting POSIX services. [ 0.569966] Xenomai: starting RTDM services. [ 0.571171] VFS: Disk quotas dquot_6.5.2 [ 0.571331] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.572222] NFS: Registering the id_resolver key type [ 0.572305] Key type id_resolver registered [ 0.572318] Key type id_legacy registered [ 0.572364] fuse init (API version 7.20) [ 0.573045] Btrfs loaded [ 0.573175] msgmni has been set to 988 [ 0.575273] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 0.575290] io scheduler noop registered [ 0.575299] io scheduler deadline registered [ 0.575326] io scheduler cfq registered (default) [ 0.576446] tps65217-bl tps65217-bl: no platform data provided [ 0.576478] tps65217-bl: probe of tps65217-bl failed with error -22 [ 0.577185] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.578607] omap_uart 44e09000.serial: did not get pins for uart0 error: -19 [ 0.579111] 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 88) is a OMAP UART0 [ 1.381608] console [ttyO0] enabled [ 1.386108] [drm] Initialized drm 1.1.0 20060810 [ 1.399538] brd: module loaded [ 1.407332] loop: module loaded [ 1.410784] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.418071] at24 1-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.425361] at24 1-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.432627] at24 1-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.439891] at24 1-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.453869] bone-capemgr bone_capemgr.8: Baseboard: 'A335BNLT,0A5C,3513BBBK1445' [ 1.461669] bone-capemgr bone_capemgr.8: compatible-baseboard=ti,beaglebone-black [ 1.469549] bone-capemgr bone_capemgr.8: Skipping disabled cape with part# BB-BONE-EMMC-2G [ 1.478251] bone-capemgr bone_capemgr.8: Skipping disabled cape with part# BB-BONELT-HDMI [ 1.510975] bone-capemgr bone_capemgr.8: slot #0: 'BeBoPr (3D-printer/CNC) Cape,R2,www.bebopr.info,cape-bebopr-brdg' [ 1.553292] bone-capemgr bone_capemgr.8: slot #1: No cape found [ 1.590398] bone-capemgr bone_capemgr.8: slot #2: No cape found [ 1.627508] bone-capemgr bone_capemgr.8: slot #3: No cape found [ 1.633758] bone-capemgr bone_capemgr.8: slot #4: specific override [ 1.640358] bone-capemgr bone_capemgr.8: bone: Using override eeprom data at slot 4 [ 1.648405] bone-capemgr bone_capemgr.8: slot #4: 'Bone-LT-eMMC-2G,00A0,Texas Instrument,BB-BONE-EMMC-2G' [ 1.658516] bone-capemgr bone_capemgr.8: slot #5: specific override [ 1.665113] bone-capemgr bone_capemgr.8: bone: Using override eeprom data at slot 5 [ 1.673160] bone-capemgr bone_capemgr.8: slot #5: 'Bone-Black-HDMI,00A0,Texas Instrument,BB-BONELT-HDMI' [ 1.683184] bone-capemgr bone_capemgr.8: slot #6: specific override [ 1.689789] bone-capemgr bone_capemgr.8: bone: Using override eeprom data at slot 6 [ 1.697837] bone-capemgr bone_capemgr.8: slot #6: 'Bone-Black-HDMIN,00A0,Texas Instrument,BB-BONELT-HDMIN' [ 1.708139] bone-capemgr bone_capemgr.8: Skipping loading of disabled cape with part# cape-bebopr-brdg [ 1.717929] bone-capemgr bone_capemgr.8: Skipping loading of disabled cape with part# BB-BONE-EMMC-2G [ 1.727614] bone-capemgr bone_capemgr.8: Skipping loading of disabled cape with part# BB-BONELT-HDMI [ 1.737358] bone-capemgr bone_capemgr.8: initialized OK. [ 1.742971] bone-capemgr bone_capemgr.8: loader: before slot-6 BB-BONELT-HDMIN:00A0 (prio 2) [ 1.751838] bone-capemgr bone_capemgr.8: loader: check slot-6 BB-BONELT-HDMIN:00A0 (prio 2) [ 1.761864] OneNAND driver initializing [ 1.766884] usbcore: registered new interface driver cdc_ether [ 1.773106] usbcore: registered new interface driver rndis_host [ 1.779404] bone-capemgr bone_capemgr.8: loader: after slot-6 BB-BONELT-HDMIN:00A0 (prio 2) [ 1.788258] usbcore: registered new interface driver cdc_ncm [ 1.794238] bone-capemgr bone_capemgr.8: slot #6: Requesting firmware 'cape-boneblack-hdmin-00A0.dtbo' for board-name 'Bone-Black-HDMIN', version '00A0' [ 1.809207] usbcore: registered new interface driver cdc_acm [ 1.815167] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 1.823570] Initializing USB Mass Storage driver... [ 1.828729] bone-capemgr bone_capemgr.8: slot #6: dtbo 'cape-boneblack-hdmin-00A0.dtbo' loaded; converting to live tree [ 1.840148] usbcore: registered new interface driver usb-storage [ 1.846463] USB Mass Storage support registered. [ 1.851554] bone-capemgr bone_capemgr.8: slot #6: #2 overlays [ 1.859073] platform 4830e000.fb: alias fck already exists [ 1.865051] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host) [ 1.871570] bone-capemgr bone_capemgr.8: slot #6: Applied #2 overlays. [ 1.878448] bone-capemgr bone_capemgr.8: loader: done slot-6 BB-BONELT-HDMIN:00A0 (prio 2) [ 1.887439] musb-hdrc musb-hdrc.0.auto: pdev->id = 0 [ 1.892691] musb-hdrc musb-hdrc.0.auto: drivers/usb/musb/musb_dsps.c:468 dsps_musb_init: OK [ 1.901487] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn) [ 1.901499] musb-hdrc: MHDRC RTL version 2.0 [ 1.901507] musb-hdrc: setup fifo_mode 4 [ 1.901525] musb-hdrc: 28/31 max ep, 16384/16384 memory [ 1.901625] musb-hdrc musb-hdrc.0.auto: *** mode=3 [ 1.906675] musb-hdrc musb-hdrc.0.auto: *** power=250 [ 1.912632] musb-hdrc musb-hdrc.1.auto: pdev->id = 1 [ 1.917920] musb-hdrc musb-hdrc.1.auto: drivers/usb/musb/musb_dsps.c:468 dsps_musb_init: OK [ 1.926750] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn) [ 1.926762] musb-hdrc: MHDRC RTL version 2.0 [ 1.926770] musb-hdrc: setup fifo_mode 4 [ 1.926782] musb-hdrc: 28/31 max ep, 16384/16384 memory [ 1.926867] musb-hdrc musb-hdrc.1.auto: *** mode=1 [ 1.931939] musb-hdrc musb-hdrc.1.auto: *** power=250 [ 1.937259] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver [ 1.943586] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 1 [ 1.951885] musb-hdrc musb-hdrc.1.auto: supports USB remote wakeup [ 1.951976] usb usb1: default language 0x0409 [ 1.952014] usb usb1: udev 1, busnum 1, minor = 0 [ 1.952027] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.959191] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.966784] usb usb1: Product: MUSB HDRC host driver [ 1.972007] usb usb1: Manufacturer: Linux 3.8.13xenomai-bone26.1 musb-hcd [ 1.979141] usb usb1: SerialNumber: musb-hdrc.1.auto [ 1.984867] usb usb1: usb_probe_device [ 1.984949] usb usb1: configuration #1 chosen from 1 choice [ 1.985006] usb usb1: adding 1-0:1.0 (config #1, interface 0) [ 1.985132] hub 1-0:1.0: usb_probe_interface [ 1.985145] hub 1-0:1.0: usb_probe_interface - got id [ 1.985164] hub 1-0:1.0: USB hub found [ 1.989149] hub 1-0:1.0: 1 port detected [ 1.993286] hub 1-0:1.0: standalone hub [ 1.993298] hub 1-0:1.0: individual port power switching [ 1.993308] hub 1-0:1.0: no over-current protection [ 1.993318] hub 1-0:1.0: Single TT [ 1.993330] hub 1-0:1.0: TT requires at most 8 FS bit times (666 ns) [ 1.993340] hub 1-0:1.0: power on to power good time: 10ms [ 1.993368] hub 1-0:1.0: local power source is good [ 1.993436] hub 1-0:1.0: enabling power on all ports [ 1.994189] mousedev: PS/2 mouse device common for all mice [ 2.002151] omap_rtc 44e3e000.rtc: rtc core: registered 44e3e000.rtc as rtc0 [ 2.009718] 44e3e000.rtc: already running [ 2.014268] i2c /dev entries driver [ 2.019088] pps_ldisc: PPS line discipline registered [ 2.024529] Driver for 1-wire Dallas network protocol. [ 2.031312] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec [ 2.039104] device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: [email protected] [ 2.048343] of_get_named_gpio_flags exited with status 6 [ 2.048358] of_get_named_gpio_flags: can't parse gpios property [ 2.048368] of_get_named_gpio_flags: can't parse gpios property [ 2.048391] omap_hsmmc mmc.4: of_parse_phandle_with_args of 'reset' failed [ 2.055650] omap_hsmmc mmc.4: Failed to get rstctl; not using any [ 2.062415] edma-dma-engine edma-dma-engine.0: allocated channel for 0:25 [ 2.069629] edma-dma-engine edma-dma-engine.0: allocated channel for 0:24 [ 2.076963] mmc.4 supply vmmc_aux not found, using dummy regulator [ 2.083859] omap_hsmmc mmc.4: pins are not configured from the driver [ 2.094438] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000 [ 2.094496] hub 1-0:1.0: hub_suspend [ 2.094527] usb usb1: bus auto-suspend, wakeup 1 [ 2.118226] pinctrl-single 44e10800.pinmux: pin 44e10854 already requested by 44e10800.pinmux; cannot claim for gpio-leds.7 [ 2.129982] pinctrl-single 44e10800.pinmux: pin-21 (gpio-leds.7) status -22 [ 2.137300] pinctrl-single 44e10800.pinmux: could not request pin 21 on device pinctrl-single [ 2.146296] leds-gpio gpio-leds.7: pins are not configured from the driver [ 2.153550] of_get_named_gpio_flags exited with status 53 [ 2.153563] of_get_named_gpio_flags exited with status 54 [ 2.153575] of_get_named_gpio_flags exited with status 55 [ 2.153587] of_get_named_gpio_flags exited with status 56 [ 2.153603] of_get_named_gpio_flags exited with status 53 [ 2.153838] of_get_named_gpio_flags exited with status 54 [ 2.153973] of_get_named_gpio_flags exited with status 55 [ 2.154096] of_get_named_gpio_flags exited with status 56 [ 2.154457] ledtrig-cpu: registered to indicate activity on CPUs [ 2.161187] edma-dma-engine edma-dma-engine.0: allocated channel for 0:36 [ 2.168445] omap-sham 53100000.sham: hw accel on OMAP rev 4.3 [ 2.176197] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2 [ 2.182360] usb usb1: usb wakeup-resume [ 2.182398] usb usb1: usb auto-resume [ 2.182418] hub 1-0:1.0: hub_resume [ 2.182459] hub 1-0:1.0: port 1: status 0101 change 0001 [ 2.182909] edma-dma-engine edma-dma-engine.0: allocated channel for 0:5 [ 2.190100] edma-dma-engine edma-dma-engine.0: allocated channel for 0:6 [ 2.198155] usbcore: registered new interface driver usbhid [ 2.204056] usbhid: USB HID core driver [ 2.209093] ashmem: initialized [ 2.212777] logger: created 256K log 'log_main' [ 2.217895] logger: created 256K log 'log_events' [ 2.223147] logger: created 256K log 'log_radio' [ 2.228306] logger: created 256K log 'log_system' [ 2.235578] TCP: cubic registered [ 2.239256] NET: Registered protocol family 10 [ 2.244918] NET: Registered protocol family 17 [ 2.249965] Key type dns_resolver registered [ 2.254733] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 [ 2.262883] ThumbEE CPU extension supported. [ 2.267422] Registering SWP/SWPB emulation handler [ 2.273164] registered taskstats version 1 [ 2.279170] of_get_named_gpio_flags: can't parse gpios property [ 2.279193] tilcdc 4830e000.fb: No power control GPIO [ 2.285972] hub 1-0:1.0: state 7 ports 1 chg 0002 evt 0000 [ 2.286031] hub 1-0:1.0: port 1, status 0101, change 0000, 12 Mb/s [ 2.294777] mmc0: host does not support reading read-only switch. assuming write-enable. [ 2.307563] mmc0: new high speed SDHC card at address e624 [ 2.313934] mmcblk0: mmc0:e624 SU04G 3.69 GiB [ 2.322470] mmcblk0: p1 p2 [ 2.391221] usb 1-1: new high-speed USB device number 2 using musb-hdrc [ 2.401662] tilcdc 4830e000.fb: found TDA19988 [ 2.407005] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 2.413974] [drm] No driver support for vblank timestamp query. [ 2.516374] usb 1-1: udev 2, busnum 1, minor = 1 [ 2.516387] usb 1-1: New USB device found, idVendor=050d, idProduct=0234 [ 2.516394] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.516800] usb 1-1: usb_probe_device [ 2.516812] usb 1-1: configuration #1 chosen from 1 choice [ 2.516968] usb 1-1: adding 1-1:1.0 (config #1, interface 0) [ 2.517086] hub 1-1:1.0: usb_probe_interface [ 2.517093] hub 1-1:1.0: usb_probe_interface - got id [ 2.517107] hub 1-1:1.0: USB hub found [ 2.517181] hub 1-1:1.0: 4 ports detected [ 2.517188] hub 1-1:1.0: standalone hub [ 2.517193] hub 1-1:1.0: ganged power switching [ 2.517198] hub 1-1:1.0: global over-current protection [ 2.517339] hub 1-1:1.0: TT per port [ 2.517348] hub 1-1:1.0: TT requires at most 8 FS bit times (666 ns) [ 2.517354] hub 1-1:1.0: power on to power good time: 100ms [ 2.517469] hub 1-1:1.0: local power source is good [ 2.517476] hub 1-1:1.0: no over-current condition exists [ 2.517662] hub 1-1:1.0: enabling power on all ports [ 2.517944] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002 [ 2.517968] hub 1-0:1.0: port 1 enable change, status 00000503 [ 2.525831] tilcdc 4830e000.fb: Not sure which CEA mode to set, leaving as DVI [ 2.544088] Console: switching to colour frame buffer device 160x64 [ 2.589722] tilcdc 4830e000.fb: fb0: frame buffer device [ 2.595398] tilcdc 4830e000.fb: registered panic notifier [ 2.601094] [drm] Initialized tilcdc 1.0.0 20121205 on minor 0 [ 2.621694] hub 1-1:1.0: port 1: status 0301 change 0001 [ 2.621834] hub 1-1:1.0: port 2: status 0301 change 0001 [ 2.656850] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6 [ 2.663274] davinci_mdio 4a101000.mdio: detected phy mask fffffffe [ 2.677721] libphy: 4a101000.mdio: probed [ 2.682044] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720 [ 2.691876] Detected MACID = c8:a0:30:aa:3c:49 [ 2.696548] cpsw 4a100000.ethernet: NAPI disabled [ 2.703104] omap_rtc 44e3e000.rtc: setting system clock to 2013-12-28 19:57:14 UTC (1388260634) [ 2.716944] ALSA device list: [ 2.720136] No soundcards found. [ 2.723891] hub 1-1:1.0: state 7 ports 4 chg 0006 evt 0000 [ 2.724003] hub 1-1:1.0: port 1, status 0301, change 0000, 1.5 Mb/s [ 2.724918] Freeing init memory: 320K [ 2.737632] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [ 2.803619] usb 1-1.1: new low-speed USB device number 3 using musb-hdrc [ 2.825527] udevd[96]: starting version 175 [ 2.830227] hub 1-1:1.0: port 1 not reset yet, waiting 10ms [ 2.911264] usb 1-1.1: skipped 1 descriptor after interface [ 2.911639] usb 1-1.1: default language 0x0409 [ 2.913215] usb 1-1.1: udev 3, busnum 1, minor = 2 [ 2.913236] usb 1-1.1: New USB device found, idVendor=046d, idProduct=c016 [ 2.920516] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.928201] usb 1-1.1: Product: Optical USB Mouse [ 2.933149] usb 1-1.1: Manufacturer: Logitech [ 2.950155] usb 1-1.1: usb_probe_device [ 2.950183] usb 1-1.1: configuration #1 chosen from 1 choice [ 2.950590] usb 1-1.1: adding 1-1.1:1.0 (config #1, interface 0) [ 2.950825] usbhid 1-1.1:1.0: usb_probe_interface [ 2.950841] usbhid 1-1.1:1.0: usb_probe_interface - got id [ 2.954497] input: Logitech Optical USB Mouse as /devices/ocp.2/47400000.usb/musb-hdrc.1.auto/usb1/1-1/1-1.1/1-1.1:1.0/input/input1 [ 2.994966] hid-generic 0003:046D:C016.0001: input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-musb-hdrc.1.auto-1.1/input0 [ 3.035877] hub 1-1:1.0: port 2, status 0301, change 0000, 1.5 Mb/s [ 3.049656] hub 1-1:1.0: port 2 not reset yet, waiting 10ms [ 3.116093] usb 1-1.2: new low-speed USB device number 4 using musb-hdrc [ 3.141472] hub 1-1:1.0: port 2 not reset yet, waiting 10ms [ 3.225477] usb 1-1.2: skipped 1 descriptor after interface [ 3.226093] usb 1-1.2: default language 0x0409 [ 3.229622] usb 1-1.2: udev 4, busnum 1, minor = 3 [ 3.229647] usb 1-1.2: New USB device found, idVendor=03f0, idProduct=0024 [ 3.236928] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.244613] usb 1-1.2: Product: HP Basic USB Keyboard [ 3.249925] usb 1-1.2: Manufacturer: CHICONY [ 3.261305] usb 1-1.2: usb_probe_device [ 3.261334] usb 1-1.2: configuration #1 chosen from 1 choice [ 3.261771] usb 1-1.2: adding 1-1.2:1.0 (config #1, interface 0) [ 3.261997] usbhid 1-1.2:1.0: usb_probe_interface [ 3.262014] usbhid 1-1.2:1.0: usb_probe_interface - got id [ 3.267732] input: CHICONY HP Basic USB Keyboard as /devices/ocp.2/47400000.usb/musb-hdrc.1.auto/usb1/1-1/1-1.2/1-1.2:1.0/input/input2 [ 3.294126] hid-generic 0003:03F0:0024.0002: input: USB HID v1.10 Keyboard [CHICONY HP Basic USB Keyboard] on usb-musb-hdrc.1.auto-1.2/input0 [ 4.587682] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 6.533936] udevd[325]: starting version 175 [ 10.938490] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) [ 11.251617] EXT4-fs (mmcblk0p2): re-mounted. Opts: errors=remount-ro [ 17.267551] net eth0: initializing cpsw version 1.12 (0) [ 17.275380] net eth0: phy found : id is : 0x7c0f1 [ 17.280359] libphy: PHY 4a101000.mdio:01 not found [ 17.285405] net eth0: phy 4a101000.mdio:01 not found on slave 1 [ 17.297598] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 20.352632] libphy: 4a101000.mdio:00 - Link is Up - 100/Full [ 20.359764] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 23.615613] Installing knfsd (copyright (C) 1996 [email protected]). [ 26.357611] gadget: using random self ethernet address [ 26.400254] usb0: MAC 7a:01:1e:df:e3:fb [ 26.404441] usb0: HOST MAC c8:a0:30:aa:3c:4b [ 26.492892] gadget: Mass Storage Function, version: 2009/09/11 [ 26.499243] gadget: Number of LUNs=1 [ 26.560475] lun0: LUN: removable file: /dev/mmcblk0p1 [ 26.612163] gadget: Multifunction Composite Gadget [ 26.634021] gadget: g_multi ready [ 26.652568] musb-hdrc musb-hdrc.0.auto: MUSB HDRC host driver [ 26.686276] musb-hdrc musb-hdrc.0.auto: new USB bus registered, assigned bus number 2 [ 26.719597] musb-hdrc musb-hdrc.0.auto: supports USB remote wakeup [ 26.719705] usb usb2: default language 0x0409 [ 26.719744] usb usb2: udev 1, busnum 2, minor = 128 [ 26.719759] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 26.726960] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 26.734592] usb usb2: Product: MUSB HDRC host driver [ 26.739820] usb usb2: Manufacturer: Linux 3.8.13xenomai-bone26.1 musb-hcd [ 26.746953] usb usb2: SerialNumber: musb-hdrc.0.auto [ 26.776094] usb usb2: usb_probe_device [ 26.776121] usb usb2: configuration #1 chosen from 1 choice [ 26.776197] usb usb2: adding 2-0:1.0 (config #1, interface 0) [ 26.776415] hub 2-0:1.0: usb_probe_interface [ 26.776428] hub 2-0:1.0: usb_probe_interface - got id [ 26.776452] hub 2-0:1.0: USB hub found [ 26.808148] hub 2-0:1.0: 1 port detected [ 26.824333] hub 2-0:1.0: standalone hub [ 26.824357] hub 2-0:1.0: individual port power switching [ 26.824368] hub 2-0:1.0: no over-current protection [ 26.824378] hub 2-0:1.0: Single TT [ 26.824390] hub 2-0:1.0: TT requires at most 8 FS bit times (666 ns) [ 26.824400] hub 2-0:1.0: power on to power good time: 10ms [ 26.824456] hub 2-0:1.0: local power source is good [ 26.824569] hub 2-0:1.0: enabling power on all ports [ 26.924678] hub 2-0:1.0: state 7 ports 1 chg 0000 evt 0000 [ 26.924753] hub 2-0:1.0: hub_suspend [ 26.924784] usb usb2: bus auto-suspend, wakeup 1 [ 27.399163] tilcdc 4830e000.fb: timeout waiting for framedone [ 29.485341] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready [ 106.979276] bone-capemgr bone_capemgr.8: part_number 'BB-LCNC-BEBOPRBR', version 'N/A' [ 106.988477] bone-capemgr bone_capemgr.8: slot #7: generic override [ 106.995072] bone-capemgr bone_capemgr.8: bone: Using override eeprom data at slot 7 [ 107.003139] bone-capemgr bone_capemgr.8: slot #7: 'Override Board Name,00A0,Override Manuf,BB-LCNC-BEBOPRBR' [ 107.013734] bone-capemgr bone_capemgr.8: slot #7: Requesting part number/version based 'BB-LCNC-BEBOPRBR-00A0.dtbo [ 107.024810] bone-capemgr bone_capemgr.8: slot #7: Requesting firmware 'BB-LCNC-BEBOPRBR-00A0.dtbo' for board-name 'Override Board Name', version '00A0' [ 107.044910] bone-capemgr bone_capemgr.8: slot #7: dtbo 'BB-LCNC-BEBOPRBR-00A0.dtbo' loaded; converting to live tree [ 107.057906] bone-capemgr bone_capemgr.8: slot #7: #2 overlays [ 107.079712] omap_hwmod: pruss: failed to hardreset [ 107.089564] bone-capemgr bone_capemgr.8: slot #7: Applied #2 overlays. [ 108.375294] bone-capemgr bone_capemgr.8: part_number 'cape-bone-iio', version 'N/A' [ 108.385605] bone-capemgr bone_capemgr.8: slot #8: generic override [ 108.392303] bone-capemgr bone_capemgr.8: bone: Using override eeprom data at slot 8 [ 108.400400] bone-capemgr bone_capemgr.8: slot #8: 'Override Board Name,00A0,Override Manuf,cape-bone-iio' [ 108.411411] bone-capemgr bone_capemgr.8: slot #8: Requesting part number/version based 'cape-bone-iio-00A0.dtbo [ 108.422721] bone-capemgr bone_capemgr.8: slot #8: Requesting firmware 'cape-bone-iio-00A0.dtbo' for board-name 'Override Board Name', version '00A0' [ 108.438721] bone-capemgr bone_capemgr.8: slot #8: dtbo 'cape-bone-iio-00A0.dtbo' loaded; converting to live tree [ 108.452084] bone-capemgr bone_capemgr.8: slot #8: #1 overlays [ 108.469976] bone-iio-helper helper.12: ready [ 108.479218] bone-capemgr bone_capemgr.8: slot #8: Applied #1 overlays. > > -- > Charles Steinkuehler > [email protected] > > ------------------------------------------------------------------------------ > Rapidly troubleshoot problems before they affect your business. Most IT > organizations don't have a clear picture of how application performance > affects their revenue. With AppDynamics, you get 100% visibility into your > Java,.NET, & PHP application. Start your 15-day FREE TRIAL of AppDynamics Pro! > http://pubads.g.doubleclick.net/gampad/clk?id=84349831&iu=/4140/ostg.clktrk_______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ Rapidly troubleshoot problems before they affect your business. Most IT organizations don't have a clear picture of how application performance affects their revenue. With AppDynamics, you get 100% visibility into your Java,.NET, & PHP application. Start your 15-day FREE TRIAL of AppDynamics Pro! http://pubads.g.doubleclick.net/gampad/clk?id=84349831&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
