Hi All Current problem solved.
I opened the .hal file in Gedit then saved it. I worked on my main computer. Tryout on my Mill computer tomorrow' Thanks All >-------Original Message------- > >From: Bill >Date: 03/30/14 07:52:17 >To: andy pugh >Subject: Re: [Emc-users] Linuxcnc stepper mill configuration > >Hi Andy > >Some of this makes sense > >To edit it at one stage I had the ,hal file in Word > >I think the easiest way is to rewrite the .hal > >Thankyou Bill > > > >From: andy pugh >Date: 03/30/14 06:45:33 >To: Bill; Enhanced Machine Controller (EMC) >Subject: Re: [Emc-users] Linuxcnc stepper mill configuration > >Having looked at the config which you attached, I am rather puzzled. >There seem to be many more files than I would expect, files named the >same as pins. Very peculiar. > >On 29 March 2014 20:41, andy pugh <bodge...@gmail.com> wrote: > On 29 March 2014 07:44, Bill <billbret...@gmail.com> wrote: > >> I rewrote my BillsMill.hal based on one in LinuxCNC forum Sept 2012 >> > > What did you edit it with? > > The error message is: > > BillsMill.hal:1: Unknown command 'Ôªø' > > Which looks like the hal file is not a plain text file any more. > > > -- > atp > If you can't fix it, you don't own it. > http://www.ifixit.com/Manifesto -- atp If you can't fix it, you don't own it. http://www.ifixit.com/Manifesto
<<attachment: THUMBS~1.GIF>>
------------------------------------------------------------------------------
_______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
