On Wed, May 14, 2014 at 8:50 AM, Gene Heskett <[email protected]> wrote:
> > > There's a Loc-Tite designed just for that kinda stuff. I forget which > > number it is, but it's in the 600 series. Depends on the fit of the > > parts, whether loose or tight. > > > > Mark > > I'll go trolling thru their site & see if I can find it then, thanks Mark. > > Loc-Tite stuff should be available at NAPA, and they are also in stock at > Lowes lumber yards, but I have a NAPA right here in Weston. Loc-Tites own > site doesn't know what a 600 series is, but they have a 2 part epoxy weld, > claims one drop of each tube mixed=3350 lbs to break, 2 1 oz tubes on a > card. Sounds good anyway. I'll get some. > You need to look for the "Retaining Compounds." http://www.henkelna.com/industrial/retaining-compounds-loctite-anaerobics-14963.htm Mark ------------------------------------------------------------------------------ "Accelerate Dev Cycles with Automated Cross-Browser Testing - For FREE Instantly run your Selenium tests across 300+ browser/OS combos. Get unparalleled scalability from the best Selenium testing platform available Simple to use. Nothing to install. Get started now for free." http://p.sf.net/sfu/SauceLabs _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
