Andy - I had forgotten about this. Actually, I could just put a header on the 2nd port of the enclosed 5i25, and use that. Hmmm - the machine is in a small case, but there might be room somewhere there for it...
Hmmm - thanks for the creative thoughts. My goal is to create a set of buttons that will allow me to use my little mill with MPG as a manual mill, without the hassle of using the keyboard/mouse to do things like set spindle speed, home, etc. The mouse/keyboard is not handy to use - they sit on a board that sits on a small rubbish bin, and is just far enough from the monitor to be difficult to read. So, the thought was to turn on power, have the computer boot into LinuxCNC, use it without resorting to keyboard/mouse, and see how it goes. John. ------------------------------------------------------------------------------ "Accelerate Dev Cycles with Automated Cross-Browser Testing - For FREE Instantly run your Selenium tests across 300+ browser/OS combos. Get unparalleled scalability from the best Selenium testing platform available Simple to use. Nothing to install. Get started now for free." http://p.sf.net/sfu/SauceLabs _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
