Hallo John, have you looked at gmoccapy? It has been designed to be used without mouse and keyboard, just with a touch screen or hardware buttons placed around the screen.
Norbert Am 15.05.2014 17:45, schrieb John Alexander Stewart: > Andy - I had forgotten about this. > > Actually, I could just put a header on the 2nd port of the enclosed 5i25, > and use that. Hmmm - the machine is in a small case, but there might be > room somewhere there for it... > > Hmmm - thanks for the creative thoughts. > > My goal is to create a set of buttons that will allow me to use my little > mill with MPG as a manual mill, without the hassle of using the > keyboard/mouse to do things like set spindle speed, home, etc. The > mouse/keyboard is not handy to use - they sit on a board that sits on a > small rubbish bin, and is just far enough from the monitor to be difficult > to read. > > So, the thought was to turn on power, have the computer boot into LinuxCNC, > use it without resorting to keyboard/mouse, and see how it goes. > > John. > ------------------------------------------------------------------------------ > "Accelerate Dev Cycles with Automated Cross-Browser Testing - For FREE > Instantly run your Selenium tests across 300+ browser/OS combos. > Get unparalleled scalability from the best Selenium testing platform available > Simple to use. Nothing to install. Get started now for free." > http://p.sf.net/sfu/SauceLabs > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ "Accelerate Dev Cycles with Automated Cross-Browser Testing - For FREE Instantly run your Selenium tests across 300+ browser/OS combos. Get unparalleled scalability from the best Selenium testing platform available Simple to use. Nothing to install. Get started now for free." http://p.sf.net/sfu/SauceLabs _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
