I do conversions remotely from time to time. In other words the customer does any physical work on the machine and I build and troubleshoot the configuration files for them.
Bit of advice git rid of BobCrap... JT On 5/9/2014 11:23 PM, MC Cason wrote: > Does anybody have any experience with the machine listed below? These > are all of the specs that I have so far: > > Manufacturer: CNC Cutting Solutions (Canada) > Make: PLASCUTTER 6x12 > Model: PLZ6X12 > Serial: 0519 > Drives: Stepper (Unknown types) > Controllers: Gecko (Unknown types) > Software: Mach2 on WinXP > CAD/CAM: BobCAD > > A company south of me has a plasma cutter that is currently not > working. The machine itself is still in good working order, and the > drives can be moved manually, but the original computer died, and all of > the settings for the machine went with it. I was told that the > manufacturer of the machine is out of business, so there is no easy way > to get them back again. > > The company is interested in converting it to LinuxCNC, if they can > find a working solution. It looks like is should be a fairly > straightforward conversion, and mostly they are seeking somebody that > has a similar setup, with a set of working config files. Any additional > information about running it on LinuxCNC would also be appreciated. > > ------------------------------------------------------------------------------ "Accelerate Dev Cycles with Automated Cross-Browser Testing - For FREE Instantly run your Selenium tests across 300+ browser/OS combos. Get unparalleled scalability from the best Selenium testing platform available Simple to use. Nothing to install. Get started now for free." http://p.sf.net/sfu/SauceLabs _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
