with scale 100 range chage from 970 to 1220
On Sat, Jun 7, 2014 at 7:02 PM, andy pugh <bodge...@gmail.com> wrote: > On 8 June 2014 02:43, a k <pccncmach...@gmail.com> wrote: > > > --Then (if you are using Axis) Machine -> Halmeter and look at the pin > > -called hm2_5i20.0.encoder.03.velocity and you should see it change as > > ---the THCAD sees a varying input voltage. > > yes there is changing numbers > > That's a good start. > > > when potentiometer in max position number -0.97 > > and when it in min position number -0.78 > > But those are strange numbers. > > > also yes number constantly changing from 3rd figures to back. > > i understand that scale number is important - right now -as an example > it > > is > > 12345 > > Try -100. > > > > -- > atp > If you can't fix it, you don't own it. > http://www.ifixit.com/Manifesto > > > ------------------------------------------------------------------------------ > Learn Graph Databases - Download FREE O'Reilly Book > "Graph Databases" is the definitive new guide to graph databases and their > applications. Written by three acclaimed leaders in the field, > this first edition is now available. Download your free book today! > http://p.sf.net/sfu/NeoTech > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ Learn Graph Databases - Download FREE O'Reilly Book "Graph Databases" is the definitive new guide to graph databases and their applications. Written by three acclaimed leaders in the field, this first edition is now available. Download your free book today! http://p.sf.net/sfu/NeoTech _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
