On 9 June 2014 20:08, andy pugh <bodge...@gmail.com> wrote: > > > And connect the output to motion.feed-override. > http://www.linuxcnc.org/docs/html/man/man9/motion.9.html > > Note that you need to enable feed-override with a G-code.
Sorry, I got that wrong. I was talking about motion.adaptive-feed (Which is almost certainly what you want). You could also use halui.feed-override.counts and set the direct-value bit to enable direct value, but that isn't realtime. (it emulates moving a slider on the GUI) -- atp If you can't fix it, you don't own it. http://www.ifixit.com/Manifesto ------------------------------------------------------------------------------ HPCC Systems Open Source Big Data Platform from LexisNexis Risk Solutions Find What Matters Most in Your Big Data with HPCC Systems Open Source. Fast. Scalable. Simple. Ideal for Dirty Data. Leverages Graph Analysis for Fast Processing & Easy Data Exploration http://p.sf.net/sfu/hpccsystems _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
