Jacob, If you just want to issue commands via a command line interface you can use linuxcncrsh. It is basically a telnet like interface. You could also shell in via ssh and then connect to local host to both go over a standard port and retain encryption. http://wiki.linuxcnc.org/cgi-bin/wiki.pl?Emcrsh
Note: It looks like the doc has reverted to the old name of Emcrsh as the title. This was the old name prior to the name change of EMC to Linuxcnc. Regards, Eric Hi, just started with LinuxCNC. I was just wondering out of curiosity, is it possible to use linuxCNC from just the terminal interface, like with ssh from another PC, or do we need the graphical interface. ------------------------------------------------------------------------------ HPCC Systems Open Source Big Data Platform from LexisNexis Risk Solutions Find What Matters Most in Your Big Data with HPCC Systems Open Source. Fast. Scalable. Simple. Ideal for Dirty Data. Leverages Graph Analysis for Fast Processing & Easy Data Exploration http://p.sf.net/sfu/hpccsystems _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users