Greetings everybody; In this new configuration to use a 5i25 in place of the parport, I have now set the edge.N.out-width-ns to 50000000 in hopes I could see the pulse with a halmeter.
They are, all 3 of them addf'd to the 30 u-sec base-thread, but I have tried the servo-thread with the same results. The inputs are changing state according to the axis spindle direction buttons. This signal is "motion.spindle reverse" But the outputs, both normal and inverted, never change state. Its exactly as if they have not been addf'd. Without this logic, I have no spindle. Has anyone ever seen this? I'm fresh out of clues (again). Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) Genes Web page <http://geneslinuxbox.net:6309/gene> US V Castleman, SCOTUS, Mar 2014 is grounds for Impeaching SCOTUS ------------------------------------------------------------------------------ Want fast and easy access to all the code in your enterprise? Index and search up to 200,000 lines of code with a free copy of Black Duck Code Sight - the same software that powers the world's largest code search on Ohloh, the Black Duck Open Hub! Try it now. http://p.sf.net/sfu/bds _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
