On Tuesday 15 July 2014 13:05:36 andy pugh did opine And Gene did reply: > On 15 July 2014 17:47, Gene Heskett <ghesk...@wdtv.com> wrote: > > In this new configuration to use a 5i25 in place of the parport, I > > have now set the edge.N.out-width-ns to 50000000 in hopes I could > > see the pulse with a halmeter. > > 50mS is still not very long for Halmeter. > Have you tried Halscope?
Humm, running the all software config that works, I can see it flicker by at 5ms pretty reliably. This isn't working at all, but just for S&G I'll add a couple more 00's to that, making it 5 seconds. BRB. You're right, now I can see it. But 50ms, with its position in the addf sequence should be enough since I am running the servo loop at 2000hz. So back to the troubleshooting. Thanks Andy. Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) Genes Web page <http://geneslinuxbox.net:6309/gene> US V Castleman, SCOTUS, Mar 2014 is grounds for Impeaching SCOTUS ------------------------------------------------------------------------------ Want fast and easy access to all the code in your enterprise? Index and search up to 200,000 lines of code with a free copy of Black Duck Code Sight - the same software that powers the world's largest code search on Ohloh, the Black Duck Open Hub! Try it now. http://p.sf.net/sfu/bds _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
