On 21 July 2014 12:06, Marius Liebenberg <mar...@mastercut.co.za> wrote: > I saw a clever plan once where the guy attached a square piece of steel > to the bottom of the vise. The steel fits the table T slot precisely.
I keep meaning to fit a key to the bottom of my vice. Or alternatively, something I saw on the internet (but can't find now) was a ground plate in a sort of wide "U" shape that fitted into the vice with the legs down to the T-slots. You hold the plate between the jaws and the plate then references the jaws to the T-slots. (This also probably means that you can keep the position in one of the work offsets) -- atp If you can't fix it, you don't own it. http://www.ifixit.com/Manifesto ------------------------------------------------------------------------------ Want fast and easy access to all the code in your enterprise? Index and search up to 200,000 lines of code with a free copy of Black Duck Code Sight - the same software that powers the world's largest code search on Ohloh, the Black Duck Open Hub! Try it now. http://p.sf.net/sfu/bds _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
