On 07/22/2014 02:44 AM, Churms, Cecil wrote: > Does this include the new trajectory planner?
The new trajectory planner is not in 2.6. It's in the master branch and will be part of 2.7. You can get debs of the master branch from the buildbot: http://buildbot.linuxcnc.org/ > How do I find the debian archive - I clicked all the buttons, but havn't > managed to see it. The linuxcnc.org debian archive is here: http://linuxcnc.org/dists/ But i'm not sure if that's what you're asking... Here are instructions on how to update an existing LinuxCNC 2.5 installation to 2.6: http://wiki.linuxcnc.org/cgi-bin/wiki.pl?UpdatingTo2.6 Here are instructions on making a fresh Ubuntu 12.04 Precise install for LinuxCNC 2.6: http://wiki.linuxcnc.org/cgi-bin/wiki.pl?LinuxCNC_On_Ubuntu_Precise And finally, here are instructions for writing the new experimental Debian 7 Wheezy LinuxCNC install image (see the email from Chris Radek in this thread) to a USB stick: http://wiki.linuxcnc.org/cgi-bin/wiki.pl?Hybrid_Iso Hope this helps! -- Sebastian Kuzminsky ------------------------------------------------------------------------------ Want fast and easy access to all the code in your enterprise? Index and search up to 200,000 lines of code with a free copy of Black Duck Code Sight - the same software that powers the world's largest code search on Ohloh, the Black Duck Open Hub! Try it now. http://p.sf.net/sfu/bds _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
