i did try net hm2_5i20.0.encoder.03.velocity => scale.0.in and net hm2_[HOSTMOT2](BOARD).0.encoder.03.velocity => scale.0.in none work signal and pin can not be same i remove ---velocity --- and emc2 open but adaptive-feed still as a number - no connection to potentiometer
On Wed, Jul 23, 2014 at 4:04 PM, andy pugh <bodge...@gmail.com> wrote: > On 23 July 2014 23:55, Stuart Stevenson <stus...@gmail.com> wrote: > > Then your links are not correct. > > scale.0.in isn't connected to encoder.03.velocity > > -- > atp > If you can't fix it, you don't own it. > http://www.ifixit.com/Manifesto > > > ------------------------------------------------------------------------------ > Want fast and easy access to all the code in your enterprise? Index and > search up to 200,000 lines of code with a free copy of Black Duck > Code Sight - the same software that powers the world's largest code > search on Ohloh, the Black Duck Open Hub! Try it now. > http://p.sf.net/sfu/bds > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ Want fast and easy access to all the code in your enterprise? Index and search up to 200,000 lines of code with a free copy of Black Duck Code Sight - the same software that powers the world's largest code search on Ohloh, the Black Duck Open Hub! Try it now. http://p.sf.net/sfu/bds _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
