On Thu, 24 Jul 2014, andy pugh wrote: > Date: Thu, 24 Jul 2014 20:17:04 +0100 > From: andy pugh <[email protected]> > Reply-To: "Enhanced Machine Controller (EMC)" > <[email protected]> > To: "Enhanced Machine Controller (EMC)" <[email protected]> > Subject: Re: [Emc-users] Stepper driven A axis with servos > > On 24 July 2014 20:12, Marius Liebenberg <[email protected]> wrote: > >> I am going to put the stepper on the parport with a cheap bob. The rest >> is 5i23 with 7i77. > > Do you mean 5i25? > > Rather than use a real parport, put a parport breakout on the 5i25 > internal header and run the BoB using a 7i77 / 7i76 firmware and you > get Mesa stepgens. > > > -- > atp > If you can't fix it, you don't own it. > http://www.ifixit.com/Manifesto
Theres also BOB compatible firmware fo a couple of BOB flavors (and you can run a 7I76/77 from a 5I23/5I20 but it needs a cable adapter) > > ------------------------------------------------------------------------------ > Want fast and easy access to all the code in your enterprise? Index and > search up to 200,000 lines of code with a free copy of Black Duck > Code Sight - the same software that powers the world's largest code > search on Ohloh, the Black Duck Open Hub! Try it now. > http://p.sf.net/sfu/bds > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > Peter Wallace Mesa Electronics (\__/) (='.'=) This is Bunny. Copy and paste bunny into your (")_(") signature to help him gain world domination. ------------------------------------------------------------------------------ Want fast and easy access to all the code in your enterprise? Index and search up to 200,000 lines of code with a free copy of Black Duck Code Sight - the same software that powers the world's largest code search on Ohloh, the Black Duck Open Hub! Try it now. http://p.sf.net/sfu/bds _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
