2014-07-29 7:51 GMT+03:00 Sebastian Kuzminsky <s...@highlab.com>: > Howdy folks, at long last LinuxCNC 2.6.0 is here. > > Here is a summary of changes since 2.5, although if you've been > following the 2.6 pre-release announcements you already have more detail > than what's here: > > http://wiki.linuxcnc.org/cgi-bin/wiki.pl?Released_2.6.X > > > If you want to upgrade from an existing LinuxCNC 2.5 installation, > carefully follow the instructions here: > > http://wiki.linuxcnc.org/cgi-bin/wiki.pl?UpdatingTo2.6 > > Hello!
First of all, thanks a lot for your work! I'm following http://wiki.linuxcnc.org/cgi-bin/wiki.pl?UpdatingTo2.6 Installing on a fresh Ubuntu 12.04.4 I updated the machine and added the key, but I have trouble installing RTAI: pkm@pkm-desktop:~$ sudo apt-get install linux-image-3.4.55-rtai-2 rtai-modules-3.4.55-rtai-2 [sudo] password for pkm: Reading package lists... Done Building dependency tree Reading state information... Done Package linux-image-3.4.55-rtai-2 is not available, but is referred to by another package. This may mean that the package is missing, has been obsoleted, or is only available from another source Package rtai-modules-3.4.55-rtai-2 is not available, but is referred to by another package. This may mean that the package is missing, has been obsoleted, or is only available from another source E: Package 'linux-image-3.4.55-rtai-2' has no installation candidate E: Package 'rtai-modules-3.4.55-rtai-2' has no installation candidate What could be the problem? Best regards, Andrew ------------------------------------------------------------------------------ Infragistics Professional Build stunning WinForms apps today! Reboot your WinForms applications with our WinForms controls. Build a bridge from your legacy apps to the future. http://pubads.g.doubleclick.net/gampad/clk?id=153845071&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
