Multiple instances are possible in MachineKit but I don't know details. They also fully supports mesa hardware.
W dniu 25.08.2014 00:28, andy pugh pisze: > On 24 August 2014 16:32, Axel Zöllich <fa...@zoellich.de> wrote: >> As I've got a lathe awaking to be controlled by linuxcnc I'me thinking about >> using a second 7i76 for the lathe connected to the same 5i25 but operated by >> another linuxcnc instance. Is this possible? > I am afraid not. You could run one machine at a time using LinuxCNC > with a different config, or you could write special G-code that ran > both machines at the same time, but you can (in effect) only run one > G-code program on one PC at a time. > > Consider that a PC to run LinuxCNC costs about €250 and a Mesa card > set is another €200 I am not sure it is worth messing about. Your > budget may vary. > ------------------------------------------------------------------------------ Slashdot TV. Video for Nerds. Stuff that matters. http://tv.slashdot.org/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
