On Sat, 13 Sep 2014, Karlsson & Wang wrote: > Date: Sat, 13 Sep 2014 21:44:26 +0200 > From: Karlsson & Wang <[email protected]> > Reply-To: "Enhanced Machine Controller (EMC)" > <[email protected]> > To: [email protected] > Subject: [Emc-users] 7i80 with ethernet, *.ini and *.hal files > > Do anyone know how to write configure the 7i80 driver? > > Best regards Nicklas Karlsson
The hm2-stepper and hm2-servo example files should be very close you just need to invoke the correct driver and specify the ip address of the FPGA card in the ini file (read the hm2_eth manual for details) like this for example: [HOSTMOT2] DRIVER=hm2_eth board_ip="10.10.10.10" BOARD=7i80 CONFIG="num_encoders=1 num_stepgens=5 sserial_port_0=20xxxxxx" (this assumes the Ethernet FPGA card has had its EEPROM IP address changed to 10.10.10.10 and that that option is selected) > > ------------------------------------------------------------------------------ > Want excitement? > Manually upgrade your production database. > When you want reliability, choose Perforce > Perforce version control. Predictably reliable. > http://pubads.g.doubleclick.net/gampad/clk?id=157508191&iu=/4140/ostg.clktrk > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > Peter Wallace Mesa Electronics (\__/) (='.'=) This is Bunny. Copy and paste bunny into your (")_(") signature to help him gain world domination. ------------------------------------------------------------------------------ Want excitement? Manually upgrade your production database. When you want reliability, choose Perforce Perforce version control. Predictably reliable. http://pubads.g.doubleclick.net/gampad/clk?id=157508191&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
