On 17 September 2014 21:40, <p...@wpnet.us> wrote: > I still have the spindle issue, no matter what I do I have not been able to > get any spindle operation in LinuxCNC. If I don't have the spindle encoder > configured I am able to control it in the PnCConf open loop test and > everything works fine except for the issue with dir dropping before the decel > is complete. If I try to configure the spindle encoder I am unable to get > spindle operation in the PnCConf open loop test either.
I wonder if PNCconf is attempting to set up a closed-loop setup which fails due to lack of a B-channel? Can you put the HAL file that pncconf is creating for you up on pastebin.com ? -- atp If you can't fix it, you don't own it. http://www.ifixit.com/Manifesto ------------------------------------------------------------------------------ Want excitement? Manually upgrade your production database. When you want reliability, choose Perforce Perforce version control. Predictably reliable. http://pubads.g.doubleclick.net/gampad/clk?id=157508191&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
