2.6.3 is fine what type of encoder are you using ? , if you open hal configuration , and then look at the count , and turn the spindle you should see it increase
On 18 September 2014 17:20, <[email protected]> wrote: > This seems to be pointing to one issue, when I do this in the open loop > test, the box that displays "hm2_5i25.0.encoder.00.position" just jumps > between 0 and 0.00025 regardless of whether I have "single input encoder" > checked. > > Still not being able to get any spindle operation at all from LinuxCNC > makes me wonder if there is some bug in 2.6.3 > > > ------Original Mail------ > From: "andy pugh" <[email protected]> > To: "Enhanced Machine Controller (EMC)" <[email protected]> > Sent: Thu, 18 Sep 2014 15:07:21 +0100 > Subject: Re: [Emc-users] New to LinuxCNC and PnCConf and need some help... > > On 18 September 2014 14:56, <[email protected]> wrote: > > I figured I'd just get the spindle running at a known speed and put a > frequency counter on it to calculate CPR > > It's easier just to reset the encoder, then turn the spindle through > one turn, and see what the number is. > > > -- > atp > If you can't fix it, you don't own it. > http://www.ifixit.com/Manifesto > > > ------------------------------------------------------------------------------ > Want excitement? > Manually upgrade your production database. > When you want reliability, choose Perforce > Perforce version control. Predictably reliable. > > http://pubads.g.doubleclick.net/gampad/clk?id=157508191&iu=/4140/ostg.clktrk > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > > > > ------------------------------------------------------------------------------ > Want excitement? > Manually upgrade your production database. > When you want reliability, choose Perforce > Perforce version control. Predictably reliable. > > http://pubads.g.doubleclick.net/gampad/clk?id=157508191&iu=/4140/ostg.clktrk > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ Slashdot TV. Video for Nerds. Stuff that Matters. http://pubads.g.doubleclick.net/gampad/clk?id=160591471&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
