On Mon, Oct 20, 2014 at 04:05:06PM +0100, andy pugh wrote: > On 20 October 2014 15:39, Chris Radek <[email protected]> wrote: > > > I admit I used halmeter and not the docs... I think they are > > > > #define EMC_MOTION_TYPE_TRAVERSE 1 > > #define EMC_MOTION_TYPE_FEED 2 > > #define EMC_MOTION_TYPE_ARC 3 > > #define EMC_MOTION_TYPE_TOOLCHANGE 4 > > #define EMC_MOTION_TYPE_PROBING 5 > > #define EMC_MOTION_TYPE_INDEXROTARY 6 > > gitweb grep doesn't show your defines. But if that is what you saw > with an actual machine, then motion.motion-type looks like exactly the > thing to use.
http://git.linuxcnc.org/gitweb?p=linuxcnc.git;a=blob;f=src/emc/nml_intf/motion_types.h;h=8d9a430a09e002cb32f76b844ddfc7e0a2bcac17;hb=9f04c26dcc6705e1a9a33d3b4185bf4b607e236c ------------------------------------------------------------------------------ Comprehensive Server Monitoring with Site24x7. Monitor 10 servers for $9/Month. Get alerted through email, SMS, voice calls or mobile push notifications. Take corrective actions from your mobile device. http://p.sf.net/sfu/Zoho _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
