On 7 January 2015 at 08:00, Mark Johnsen <m...@ijohnsen.com> wrote: > Is gearchange the appropriate Hal component to use? Seems perfect.
If you only have two gears then it is probably ideal. For more than 2 gears there are other options, but for some reason none have been accepted into the main package. If you have a spindle encoder then it is reasonably easy to work out the gear ratio. Reset the encoder counts from halcmd then turn the input shaft 10 turns while watching the encoder.position pin with a halmeter. -- atp If you can't fix it, you don't own it. http://www.ifixit.com/Manifesto ------------------------------------------------------------------------------ Dive into the World of Parallel Programming! The Go Parallel Website, sponsored by Intel and developed in partnership with Slashdot Media, is your hub for all things parallel software development, from weekly thought leadership blogs to news, videos, case studies, tutorials and more. Take a look and join the conversation now. http://goparallel.sourceforge.net _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
