Andreas, I believe (without looking at the Argon specs), that the ANAIN+ signal on the Argon is the Analog Input (-10 to +10v probably), which would connect to the AOUT0 on the 7I48. ENA0+ on the 7I48 is an Enable Output. There should be an enable input on the Argon, but I don't seen anything labeled that way on your spreadsheet, so you need to examine the manual more closely.
-- Ralph ________________________________________ From: Andreas Pettersson [andr...@roughedge.se] Sent: Tuesday, February 10, 2015 11:03 PM To: emc-users@lists.sourceforge.net Subject: [Emc-users] Need wiring advice, Argon + 7i48 So i got this Mesa 7i48 analog servo card, a 15pin differential encoder, and the argon driver. Make notice i have no clue what im doing, so i made this chart and just connect the pins together basicly with a color chart. The Argon uses a 24V@0.4A DC input, and the mesa card uses 5V - but i need to split the encoder cables from the Driver and connect em to the mesa card as well.. Not sure if this is the right way of doing it. https://docs.google.com/spreadsheets/d/1u0vVnGZnDBdwTkmWv6m_r7q4JR2niON6E5N9PaSPE_4/edit#gid=0 Some advice on this subject would be appreciated. Regards, Andreas ------------------------------------------------------------------------------ Dive into the World of Parallel Programming. The Go Parallel Website, sponsored by Intel and developed in partnership with Slashdot Media, is your hub for all things parallel software development, from weekly thought leadership blogs to news, videos, case studies, tutorials and more. Take a look and join the conversation now. http://goparallel.sourceforge.net/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ Dive into the World of Parallel Programming. The Go Parallel Website, sponsored by Intel and developed in partnership with Slashdot Media, is your hub for all things parallel software development, from weekly thought leadership blogs to news, videos, case studies, tutorials and more. Take a look and join the conversation now. http://goparallel.sourceforge.net/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
