Having built multizone ovens and oven controls over the years....Yes, you can control it with a general purpose machine control program, but the dedicated temperature controllers you can buy on EBAY or occasionally from www.mpja.com are very inexpensive and will give you much better control of the temperature. Use an SSR type relay for the heaters. The overtemp limiter control is NOT optional, always include one in any heater related project. Also keep the safety stuff completely separate from the control stuff. By that I mean the overtemp limiter controls a mechanical contactor, not just turns the SSR signal off.
----- Original Message ----- From: emc-users-requ...@lists.sourceforge.net To: emc-users@lists.sourceforge.net Sent: Wednesday, February 25, 2015 12:46:39 PM Subject: Emc-users Digest, Vol 106, Issue 65 Send Emc-users mailing list submissions to emc-users@lists.sourceforge.net To subscribe or unsubscribe via the World Wide Web, visit https://lists.sourceforge.net/lists/listinfo/emc-users or, via email, send a message with subject or body 'help' to emc-users-requ...@lists.sourceforge.net You can reach the person managing the list at emc-users-ow...@lists.sourceforge.net When replying, please edit your Subject line so it is more specific than "Re: Contents of Emc-users digest..." Today's Topics: 1. Mesa 7i80 on master (Marius Liebenberg) 2. Re: Mesa configuration (Marius Liebenberg) 3. Re: Controlling an infrared reflow oven using LinuxCNC (Marius Alksnys) 4. Re: Mesa configuration (Marius Liebenberg) 5. Mesa 7i80 on master (Marius Liebenberg) 6. Re: Mesa configuration (Peter C. Wallace) 7. Re: Mesa 7i80 on master (Sebastian Kuzminsky) ---------------------------------------------------------------------- Message: 1 Date: Tue, 24 Feb 2015 14:35:59 +0000 From: "Marius Liebenberg" <mar...@mastercut.co.za> Subject: [Emc-users] Mesa 7i80 on master To: "Enhanced Machine Controller (EMC)" <emc-users@lists.sourceforge.net> Message-ID: <em134a0d05-717f-4e39-948c-fd3ce2a21d90@marius-pc> Content-Type: text/plain; format=flowed; charset=utf-8 Can I run Mesa 7i80 on master or must I do some tricks to run it. I cannot seem to find the hm2_eth driver on my master installation. Is there a recent wiki or instruction that I can follow to get my 7i80 running. Maybe a config example? Any and all help is much appreciated. ----------------------------- Regards / Groete Marius D. Liebenberg +27 82 698 3251 +27 12 746 6064 ------------------------------ Message: 2 Date: Tue, 24 Feb 2015 14:38:36 +0000 From: "Marius Liebenberg" <mar...@mastercut.co.za> Subject: Re: [Emc-users] Mesa configuration To: "Enhanced Machine Controller (EMC)" <emc-users@lists.sourceforge.net> Message-ID: <emaaf9daa5-f11f-4e79-a9b1-51f5e994e48c@marius-pc> Content-Type: text/plain; format=flowed; charset=utf-8 Peter I tried to flash this bit file using Mesaflash utility but I got an error that states that this version of the board does not allow for FPGA resetting. I have 7i80-HD-25. ------ Original Message ------ From: "Peter C. Wallace" <p...@mesanet.com> To: "Enhanced Machine Controller (EMC)" <emc-users@lists.sourceforge.net> Sent: 2015-02-23 23:57:59 Subject: Re: [Emc-users] Mesa configuration >On Mon, 23 Feb 2015, Marius Liebenberg wrote: > >> Date: Mon, 23 Feb 2015 21:10:51 +0000 >> From: Marius Liebenberg <mar...@mastercut.co.za> >> To: "Enhanced Machine Controller (EMC)" >><emc-users@lists.sourceforge.net> >> Subject: [Emc-users] Mesa configuration >> >> I have a 7i80 that has to connect to a 7i44. The 7i44 connects to a >>7i70 >> and 7i71. >> I am trying to setup the card but I cannot find a bit file for this >> combination. Does anyone know how I go about setting up this >> configuration please? >> > > >7i80hd_16_svss8_8.bit > >Is probably close if the rest of the I/O is a normal servo config > >What daughtercards are being used with the 7I80? > > > >> >> >> ----------------------------- >> Regards / Groete >> >> Marius D. Liebenberg >> +27 82 698 3251 >> +27 12 746 6064 >> >>------------------------------------------------------------------------------ >> >> Download BIRT iHub F-Type - The Free Enterprise-Grade BIRT Server >> from Actuate! Instantly Supercharge Your Business Reports and >>Dashboards >> with Interactivity, Sharing, Native Excel Exports, App Integration & >>more >> Get technology previously reserved for billion-dollar corporations, >>FREE >> >>http://pubads.g.doubleclick.net/gampad/clk?id=190641631&iu=/4140/ostg.clktrk >> _______________________________________________ >> Emc-users mailing list >> Emc-users@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/emc-users >> > >Peter Wallace >Mesa Electronics > >(\__/) >(='.'=) This is Bunny. Copy and paste bunny into your >(")_(") signature to help him gain world domination. > > >------------------------------------------------------------------------------ >Download BIRT iHub F-Type - The Free Enterprise-Grade BIRT Server >from Actuate! Instantly Supercharge Your Business Reports and >Dashboards >with Interactivity, Sharing, Native Excel Exports, App Integration & >more >Get technology previously reserved for billion-dollar corporations, >FREE >http://pubads.g.doubleclick.net/gampad/clk?id=190641631&iu=/4140/ostg.clktrk >_______________________________________________ >Emc-users mailing list >Emc-users@lists.sourceforge.net >https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------ Message: 3 Date: Wed, 25 Feb 2015 06:43:28 +0200 From: Marius Alksnys <marius.alks...@gmail.com> Subject: Re: [Emc-users] Controlling an infrared reflow oven using LinuxCNC To: emc-users@lists.sourceforge.net Message-ID: <mcjjtg$tuc$1...@ger.gmane.org> Content-Type: text/plain; charset=windows-1252; format=flowed I agree to Kirk. Also consider BeagleBone and Machinekit. BBB has several ADC channels already. I think it should be easy to use its SPI in user space too. There are some items from my collection to watch: http://r.ebay.com/TFtcVt And some thoughts, found on web-search about serial interfaces and LinuxCNC: http://emc-developers.narkive.com/RRUNdxHT/parallel-port-expansion-via-i2c-spi On 11/09/2013 06:36 PM, Kirk Wallace wrote: > On 11/08/2013 02:38 PM, Jean-Michel Pour? - GOOZE wrote: >> Dear all, >> >> I need to know to what extend Linux CNC could be used to manage an >> infrared SMT reflow oven. Any ideas are welcome. > > Linuxcnc could handle your oven control. In my opinion the advantages > would be: > -Common, cheap, non-proprietary PC hardware > -HAL system to connect hardware and software components > -HALscope and HALmeter to monitor and troubleshoot > -Possibly HAL mapping to document your configuration > -Software and hardware signal generators that integrate well with HAL > -Software PLC that integrates well with HAL, if that is your thing > -GladeVCP or pyVCP for developing a custom user interface > -Python interface if one is not strong in C > -Network and remote monitor/control ready > -Modbus ready > -more that hasn't come to mind yet > > I would tend to consider what skills one already has and choose a > solution that matches. If you know how to use hardware PLCs, then maybe > a PLC should be the base of your system, but you might still need to > fill in some of the points listed above. I like AVRs, but you would need > to develop a system almost from scratch. > > Just my two bits worth. > ------------------------------ Message: 4 Date: Tue, 24 Feb 2015 14:38:36 +0000 From: "Marius Liebenberg" <mar...@mastercut.co.za> Subject: Re: [Emc-users] Mesa configuration To: "Enhanced Machine Controller (EMC)" <emc-users@lists.sourceforge.net> Message-ID: <emaaf9daa5-f11f-4e79-a9b1-51f5e994e48c@marius-pc> Content-Type: text/plain; format=flowed; charset=utf-8 Peter I tried to flash this bit file using Mesaflash utility but I got an error that states that this version of the board does not allow for FPGA resetting. I have 7i80-HD-25. ------ Original Message ------ From: "Peter C. Wallace" <p...@mesanet.com> To: "Enhanced Machine Controller (EMC)" <emc-users@lists.sourceforge.net> Sent: 2015-02-23 23:57:59 Subject: Re: [Emc-users] Mesa configuration >On Mon, 23 Feb 2015, Marius Liebenberg wrote: > >> Date: Mon, 23 Feb 2015 21:10:51 +0000 >> From: Marius Liebenberg <mar...@mastercut.co.za> >> To: "Enhanced Machine Controller (EMC)" >><emc-users@lists.sourceforge.net> >> Subject: [Emc-users] Mesa configuration >> >> I have a 7i80 that has to connect to a 7i44. The 7i44 connects to a >>7i70 >> and 7i71. >> I am trying to setup the card but I cannot find a bit file for this >> combination. Does anyone know how I go about setting up this >> configuration please? >> > > >7i80hd_16_svss8_8.bit > >Is probably close if the rest of the I/O is a normal servo config > >What daughtercards are being used with the 7I80? > > > >> >> >> ----------------------------- >> Regards / Groete >> >> Marius D. Liebenberg >> +27 82 698 3251 >> +27 12 746 6064 >> >>------------------------------------------------------------------------------ >> >> Download BIRT iHub F-Type - The Free Enterprise-Grade BIRT Server >> from Actuate! Instantly Supercharge Your Business Reports and >>Dashboards >> with Interactivity, Sharing, Native Excel Exports, App Integration & >>more >> Get technology previously reserved for billion-dollar corporations, >>FREE >> >>http://pubads.g.doubleclick.net/gampad/clk?id=190641631&iu=/4140/ostg.clktrk >> _______________________________________________ >> Emc-users mailing list >> Emc-users@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/emc-users >> > >Peter Wallace >Mesa Electronics > >(\__/) >(='.'=) This is Bunny. Copy and paste bunny into your >(")_(") signature to help him gain world domination. > > >------------------------------------------------------------------------------ >Download BIRT iHub F-Type - The Free Enterprise-Grade BIRT Server >from Actuate! Instantly Supercharge Your Business Reports and >Dashboards >with Interactivity, Sharing, Native Excel Exports, App Integration & >more >Get technology previously reserved for billion-dollar corporations, >FREE >http://pubads.g.doubleclick.net/gampad/clk?id=190641631&iu=/4140/ostg.clktrk >_______________________________________________ >Emc-users mailing list >Emc-users@lists.sourceforge.net >https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------ Message: 5 Date: Tue, 24 Feb 2015 14:35:59 +0000 From: "Marius Liebenberg" <mar...@mastercut.co.za> Subject: [Emc-users] Mesa 7i80 on master To: "Enhanced Machine Controller (EMC)" <emc-users@lists.sourceforge.net> Message-ID: <em134a0d05-717f-4e39-948c-fd3ce2a21d90@marius-pc> Content-Type: text/plain; format=flowed; charset=utf-8 Can I run Mesa 7i80 on master or must I do some tricks to run it. I cannot seem to find the hm2_eth driver on my master installation. Is there a recent wiki or instruction that I can follow to get my 7i80 running. Maybe a config example? Any and all help is much appreciated. ----------------------------- Regards / Groete Marius D. Liebenberg +27 82 698 3251 +27 12 746 6064 ------------------------------ Message: 6 Date: Wed, 25 Feb 2015 12:39:57 -0800 (PST) From: "Peter C. Wallace" <p...@mesanet.com> Subject: Re: [Emc-users] Mesa configuration To: Marius Liebenberg <mar...@mastercut.co.za>, "Enhanced Machine Controller (EMC)" <emc-users@lists.sourceforge.net> Message-ID: <pine.neb.4.64.1502251238100.7...@freeby.mesanet.com> Content-Type: TEXT/PLAIN; charset=US-ASCII; format=flowed On Tue, 24 Feb 2015, Marius Liebenberg wrote: > Date: Tue, 24 Feb 2015 14:38:36 +0000 > From: Marius Liebenberg <mar...@mastercut.co.za> > To: "Enhanced Machine Controller (EMC)" <emc-users@lists.sourceforge.net> > Subject: Re: [Emc-users] Mesa configuration > > Peter > I tried to flash this bit file using Mesaflash utility but I got an > error that states that this version of the board does not allow for FPGA > resetting. > I have 7i80-HD-25. > If you have a -25 you must choose a appropriate bit file like 7i80hd_25_svss8_8.bit > > > ------ Original Message ------ > From: "Peter C. Wallace" <p...@mesanet.com> > To: "Enhanced Machine Controller (EMC)" > <emc-users@lists.sourceforge.net> > Sent: 2015-02-23 23:57:59 > Subject: Re: [Emc-users] Mesa configuration > >> On Mon, 23 Feb 2015, Marius Liebenberg wrote: >> >>> Date: Mon, 23 Feb 2015 21:10:51 +0000 >>> From: Marius Liebenberg <mar...@mastercut.co.za> >>> To: "Enhanced Machine Controller (EMC)" >>> <emc-users@lists.sourceforge.net> >>> Subject: [Emc-users] Mesa configuration >>> >>> I have a 7i80 that has to connect to a 7i44. The 7i44 connects to a >>> 7i70 >>> and 7i71. >>> I am trying to setup the card but I cannot find a bit file for this >>> combination. Does anyone know how I go about setting up this >>> configuration please? >>> >> >> >> 7i80hd_16_svss8_8.bit >> >> Is probably close if the rest of the I/O is a normal servo config >> >> What daughtercards are being used with the 7I80? >> >> >> >>> >>> >>> ----------------------------- >>> Regards / Groete >>> >>> Marius D. Liebenberg >>> +27 82 698 3251 >>> +27 12 746 6064 >>> >>> ------------------------------------------------------------------------------ >>> >>> Download BIRT iHub F-Type - The Free Enterprise-Grade BIRT Server >>> from Actuate! Instantly Supercharge Your Business Reports and >>> Dashboards >>> with Interactivity, Sharing, Native Excel Exports, App Integration & >>> more >>> Get technology previously reserved for billion-dollar corporations, >>> FREE >>> >>> http://pubads.g.doubleclick.net/gampad/clk?id=190641631&iu=/4140/ostg.clktrk >>> >>> _______________________________________________ >>> Emc-users mailing list >>> Emc-users@lists.sourceforge.net >>> https://lists.sourceforge.net/lists/listinfo/emc-users >>> >> >> Peter Wallace >> Mesa Electronics >> >> (\__/) >> (='.'=) This is Bunny. Copy and paste bunny into your >> (")_(") signature to help him gain world domination. >> >> >> ------------------------------------------------------------------------------ >> >> Download BIRT iHub F-Type - The Free Enterprise-Grade BIRT Server >> from Actuate! Instantly Supercharge Your Business Reports and >> Dashboards >> with Interactivity, Sharing, Native Excel Exports, App Integration & >> more >> Get technology previously reserved for billion-dollar corporations, >> FREE >> http://pubads.g.doubleclick.net/gampad/clk?id=190641631&iu=/4140/ostg.clktrk >> _______________________________________________ >> Emc-users mailing list >> Emc-users@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/emc-users > > > ------------------------------------------------------------------------------ > > Dive into the World of Parallel Programming The Go Parallel Website, > sponsored > by Intel and developed in partnership with Slashdot Media, is your hub for > all > things parallel software development, from weekly thought leadership blogs to > news, videos, case studies, tutorials and more. Take a look and join the > conversation now. http://goparallel.sourceforge.net/ > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > Peter Wallace Mesa Electronics (\__/) (='.'=) This is Bunny. Copy and paste bunny into your (")_(") signature to help him gain world domination. ------------------------------ Message: 7 Date: Wed, 25 Feb 2015 13:46:29 -0700 From: Sebastian Kuzminsky <s...@highlab.com> Subject: Re: [Emc-users] Mesa 7i80 on master To: Marius Liebenberg <mar...@mastercut.co.za>, "Enhanced Machine Controller (EMC)" <emc-users@lists.sourceforge.net> Message-ID: <54ee34a5....@highlab.com> Content-Type: text/plain; charset=windows-1252 On 02/24/2015 07:35 AM, Marius Liebenberg wrote: > Can I run Mesa 7i80 on master or must I do some tricks to run it. I > cannot seem to find the hm2_eth driver on my master installation. The hm2_eth driver should be in 2.7 and newer (including master). Are you installing using the debs on www.linuxcnc.org, the debs from the buildbot, or compiling it yourself from git? -- Sebastian Kuzminsky ------------------------------ ------------------------------------------------------------------------------ Dive into the World of Parallel Programming The Go Parallel Website, sponsored by Intel and developed in partnership with Slashdot Media, is your hub for all things parallel software development, from weekly thought leadership blogs to news, videos, case studies, tutorials and more. Take a look and join the conversation now. http://goparallel.sourceforge.net/ ------------------------------ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users End of Emc-users Digest, Vol 106, Issue 65 ****************************************** ------------------------------------------------------------------------------ Dive into the World of Parallel Programming The Go Parallel Website, sponsored by Intel and developed in partnership with Slashdot Media, is your hub for all things parallel software development, from weekly thought leadership blogs to news, videos, case studies, tutorials and more. Take a look and join the conversation now. http://goparallel.sourceforge.net/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
