On 03/01/2015 11:53 AM, Martin Dobbins wrote: > Jon, > > Thanks, I'm a little concerned about the count. Back of an envelope > calculations suggest that by the time I put a countershaft on the Sherline > lathe to get useful torque at a low speed it will top out at ~1700 rpm > > Oh, yes, if you are ONLY using software to read the encoder, that is a real problem! I use various hardware to read encoders, so it is no problem, and I forget others may not do that.
Jon ------------------------------------------------------------------------------ Dive into the World of Parallel Programming The Go Parallel Website, sponsored by Intel and developed in partnership with Slashdot Media, is your hub for all things parallel software development, from weekly thought leadership blogs to news, videos, case studies, tutorials and more. Take a look and join the conversation now. http://goparallel.sourceforge.net/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users