On 03/06/2015 02:43 PM, Todd Zuercher wrote: > What sort of screen?
20" LCD. Dell, I think. > Where is it in relation to the VFD? The LCD is on an articulated arm, a little above eye level, mounted to the side of the large nonmetallic enclosure. The VFD is mounted in the steel electrical enclosure about five feet lower. The cables all exit through cable clamps in holes on the bottom of the electrical enclosure. I really need to take the digital storage oscilloscope over there to quantify the noise problem. I mostly designed it with EMI in mind to prevent problems, then did a couple of quick and dirty obvious fixes (better cable routing, ferrite magic beans) that seemed likely to help but didn't. It's time to get serious, figure out the real issue and then fix it. My ears perked up when I saw this thread. I was hoping someone would fix my problem for me. :-) ------------------------------------------------------------------------------ Dive into the World of Parallel Programming The Go Parallel Website, sponsored by Intel and developed in partnership with Slashdot Media, is your hub for all things parallel software development, from weekly thought leadership blogs to news, videos, case studies, tutorials and more. Take a look and join the conversation now. http://goparallel.sourceforge.net/ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
