On Mon, 16 Mar 2015, Marius Liebenberg wrote: > Date: Mon, 16 Mar 2015 07:19:38 +0000 > From: Marius Liebenberg <[email protected]> > To: "Enhanced Machine Controller (EMC)" <[email protected]> > Subject: [Emc-users] Mesa 7i8- hal load string > > Hi > I am looking for an example of the load string in the hal file for the > 7i80. I have done as the manual directed but I am not sure if it is > correct.
[HOSTMOT2] DRIVER=hm2_eth board_ip="10.10.10.10" BOARD=7i80 CONFIG="num_encoders=1 num_stepgens=5 sserial_port_0=20xxxxxx" > > I still cannot get the 7i80 to communicate with the hm2 driver. The > board mac is read but there it ends. > > > ----------------------------- > Regards / Groete > > Marius D. Liebenberg > +27 82 698 3251 > +27 12 746 6064 > ------------------------------------------------------------------------------ > Dive into the World of Parallel Programming The Go Parallel Website, sponsored > by Intel and developed in partnership with Slashdot Media, is your hub for all > things parallel software development, from weekly thought leadership blogs to > news, videos, case studies, tutorials and more. Take a look and join the > conversation now. http://goparallel.sourceforge.net/ > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > Peter Wallace Mesa Electronics (\__/) (='.'=) This is Bunny. Copy and paste bunny into your (")_(") signature to help him gain world domination. ------------------------------------------------------------------------------ Dive into the World of Parallel Programming The Go Parallel Website, sponsored by Intel and developed in partnership with Slashdot Media, is your hub for all things parallel software development, from weekly thought leadership blogs to news, videos, case studies, tutorials and more. Take a look and join the conversation now. http://goparallel.sourceforge.net/ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
