On 30 March 2015 at 10:31, Gregg Eshelman <g_ala...@yahoo.com> wrote: > Suggestions?
Ignore the stepper motor voltage rating, it doesn't mean anything. (in practical terms) Set the stepper drivers to the right current for each motor and everything will be fine. You almost certainly want to be ignoring the centre-tap wires on the steppers, those are provided for unipolar operation. (so you will only wire 4 out of 6 wires) -- atp If you can't fix it, you don't own it. http://www.ifixit.com/Manifesto ------------------------------------------------------------------------------ Dive into the World of Parallel Programming The Go Parallel Website, sponsored by Intel and developed in partnership with Slashdot Media, is your hub for all things parallel software development, from weekly thought leadership blogs to news, videos, case studies, tutorials and more. Take a look and join the conversation now. http://goparallel.sourceforge.net/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
