That is the correct behavior for using M2 or M30 to end a program. http://linuxcnc.org/docs/html/gcode/m-code.html#sec:M2-M30
http://linuxcnc.org/docs/html/gcode/overview.html#_file_requirements JT On 4/1/2015 6:32 AM, Belli Button wrote: > Another funny... > > When I stop a program, LCNC sends my spindle speed to zero, I have to MDI a > spindle speed (SXXXX) and then M3 to start the spindle or it stats with zero > speed, am I doing something wrong? > > > > > > ------------------------------------------------------------------------------ > Dive into the World of Parallel Programming The Go Parallel Website, sponsored > by Intel and developed in partnership with Slashdot Media, is your hub for all > things parallel software development, from weekly thought leadership blogs to > news, videos, case studies, tutorials and more. Take a look and join the > conversation now. http://goparallel.sourceforge.net/ > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ Dive into the World of Parallel Programming The Go Parallel Website, sponsored by Intel and developed in partnership with Slashdot Media, is your hub for all things parallel software development, from weekly thought leadership blogs to news, videos, case studies, tutorials and more. Take a look and join the conversation now. http://goparallel.sourceforge.net/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
