Seems like stopping a running program does not change the S word so a PyVCP button to issue a M3 would be a simple thing to add.
I wonder if my posts are getting through, I never see them... JT On 4/1/2015 1:29 PM, Belli Button wrote: > All good suggestions, if I get one of the GUi's figured out I guess I could > make a button that automatically did an MDI 'SXXX M3' when pressed. > > > > -----Original Message----- > From: andy pugh [mailto:bodge...@gmail.com] > Sent: 01 April 2015 18:39 > To: Enhanced Machine Controller (EMC) > Subject: Re: [Emc-users] LCNC sends Spindle to zero speed on stop. > > On 1 April 2015 at 16:09, Jon Elson <el...@pico-systems.com> wrote: >> it >> would be kind of nice if clicking F9 again would start the spindle at >> the last speed, but I can see there is a safety issue there. > I can see an argument for an extra HAL pin… motion.spindle-speed-persistent > > As we already have 4 separate spindle speed outputs this might be getting a > bit over-complicated though. > > -- > atp > If you can't fix it, you don't own it. > http://www.ifixit.com/Manifesto > > ------------------------------------------------------------------------------ > Dive into the World of Parallel Programming The Go Parallel Website, > sponsored by Intel and developed in partnership with Slashdot Media, is your > hub for all things parallel software development, from weekly thought > leadership blogs to news, videos, case studies, tutorials and more. Take a > look and join the conversation now. http://goparallel.sourceforge.net/ > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > > > ------------------------------------------------------------------------------ > Dive into the World of Parallel Programming The Go Parallel Website, sponsored > by Intel and developed in partnership with Slashdot Media, is your hub for all > things parallel software development, from weekly thought leadership blogs to > news, videos, case studies, tutorials and more. Take a look and join the > conversation now. http://goparallel.sourceforge.net/ > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ Dive into the World of Parallel Programming The Go Parallel Website, sponsored by Intel and developed in partnership with Slashdot Media, is your hub for all things parallel software development, from weekly thought leadership blogs to news, videos, case studies, tutorials and more. Take a look and join the conversation now. http://goparallel.sourceforge.net/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
