On Mon, 6 Apr 2015, Rick Lair wrote: > Date: Mon, 06 Apr 2015 14:13:27 -0400 > From: Rick Lair <[email protected]> > Reply-To: "Enhanced Machine Controller (EMC)" > <[email protected]> > To: Marius Liebenberg <[email protected]>, > "Enhanced Machine Controller (EMC)" <[email protected]> > Subject: Re: [Emc-users] PNCConf setup > > On the topic of the 7i80, I am actually doing two machines at once, both > nearly identical, the second is about 10 miles down the road though, for > a good friend of our shop, and I have done a carbon copy build on both > machines. My question is, if the guy at the other shop doesn't have a > wireless access point in his shop, is there any way to use the 7i80 > along side his LAN ? Or do I need to just do a fresh pull before getting > rolling on the programming of the control, and not worry about having a > network connection after I get the 7i80 connected and operating?
Its a pain to deal with network issues unless you have 2 LAN connections. If you dont have wireless, one option is to install a LAN card for the real time interface (a Realtek 8139 card works well). Another option is to use a USB--> Ethernet adapter for the non-realtime (internet) connection > > > Rick > > On 4/6/2015 1:52 PM, Marius Liebenberg wrote: >> I take it that you got the 7I80 running then. >> >> ------ Original Message ------ >> From: "Rick" <[email protected]> >> To: "Marius Liebenberg" <[email protected]>; "Enhanced Machine >> Controller (EMC)" <[email protected]> >> Sent: 2015-04-06 19:48:31 >> Subject: Re: [Emc-users] PNCConf setup >> >>> I think I am going to try to start with just the base INI and the main >>> stuff normally towards the top of the HAL file, temporarily deleting >>> all pin associated verbage, start-up linux, then look at the pin names >>> in the "hal show" to see what I am dealing with. >>> >>> >>> >>> On 4/6/2015 1:44 PM, Marius Liebenberg wrote: >>>> That is about right Rick. >>>> >>>> ------ Original Message ------ >>>> From: "Rick" <[email protected]> >>>> To: "Enhanced Machine Controller (EMC)" >>>> <[email protected]> >>>> Sent: 2015-04-06 18:58:51 >>>> Subject: Re: [Emc-users] PNCConf setup >>>> >>>>> I do have a few, 3 to be exact, running almost a carbon copy build >>>>> (5i23-7i49-7i44-7i71-7i70-7i73), of what I am building now, >>>>> (7i80-7i49-7i52-7i71-7i70-7i73). >>>>> >>>>> Would a line that looked like this before, >>>>> >>>>> net spindle-low-range-sol => >>>>> hm2_5i23.0.7i71.0.3.output-00 >>>>> >>>>> Look like this with the 7i80? >>>>> >>>>> net spindle-low-range-sol => >>>>> hm2_7i80.0.7i71.0.3.output-00 >>>>> >>>>> >>>>> >>>>> >>>>> On 4/6/2015 12:05 PM, Peter C. Wallace wrote: >>>>>> On Mon, 6 Apr 2015, Rick wrote: >>>>>> >>>>>>> Date: Mon, 06 Apr 2015 11:57:21 -0400 >>>>>>> From: Rick <[email protected]> >>>>>>> Reply-To: "Enhanced Machine Controller (EMC)" >>>>>>> <[email protected]> >>>>>>> To: Emc Users <[email protected]> >>>>>>> Subject: [Emc-users] PNCConf setup >>>>>>> >>>>>>> Hello Guys, >>>>>>> >>>>>>> What would be the closest configuration to try to build with from >>>>>>> the >>>>>>> PNCConf utility, I am using the 7i80HD-16 card. I know that the >>>>>>> card >>>>>>> is >>>>>>> not an option yet in the utility, and just want to try to get my >>>>>>> files >>>>>>> roughed out with that, instead of trying to hand write my HAL >>>>>>> file >>>>>>> from >>>>>>> scratch. >>>>>>> >>>>>>> >>>>>>> -- >>>>>>> >>>>>>> Thanks >>>>>>> >>>>>>> >>>>>>> Rick Lair >>>>>>> Superior Roll & Turning LLC >>>>>>> 399 East Center Street >>>>>>> Petersburg MI, 49270 >>>>>>> PH: 734-279-1831 >>>>>>> FAX: 734-279-1166 >>>>>>> www.superiorroll.com >>>>>>> >>>>>> ISTR that you have a 5i23 config with a resolver, that should be a >>>>>> close >>>>>> starting point >>>>>> >>>>>> >>>>>>> >>>>>>> ------------------------------------------------------------------------------ >>>>>>> BPM Camp - Free Virtual Workshop May 6th at 10am PDT/1PM EDT >>>>>>> Develop your own process in accordance with the BPMN 2 standard >>>>>>> Learn Process modeling best practices with Bonita BPM through >>>>>>> live >>>>>>> exercises >>>>>>> http://www.bonitasoft.com/be-part-of-it/events/bpm-camp-virtual- >>>>>>> event?utm_ >>>>>>> >>>>>>> source=Sourceforge_BPM_Camp_5_6_15&utm_medium=email&utm_campaign=VA_SF >>>>>>> _______________________________________________ >>>>>>> Emc-users mailing list >>>>>>> [email protected] >>>>>>> https://lists.sourceforge.net/lists/listinfo/emc-users >>>>>>> >>>>>> Peter Wallace >>>>>> Mesa Electronics >>>>>> >>>>>> (\__/) >>>>>> (='.'=) This is Bunny. Copy and paste bunny into your >>>>>> (")_(") signature to help him gain world domination. >>>>>> >>>>>> >>>>>> >>>>>> ------------------------------------------------------------------------------ >>>>>> BPM Camp - Free Virtual Workshop May 6th at 10am PDT/1PM EDT >>>>>> Develop your own process in accordance with the BPMN 2 standard >>>>>> Learn Process modeling best practices with Bonita BPM through live >>>>>> exercises >>>>>> http://www.bonitasoft.com/be-part-of-it/events/bpm-camp-virtual- >>>>>> event?utm_ >>>>>> >>>>>> source=Sourceforge_BPM_Camp_5_6_15&utm_medium=email&utm_campaign=VA_SF >>>>>> _______________________________________________ >>>>>> Emc-users mailing list >>>>>> [email protected] >>>>>> https://lists.sourceforge.net/lists/listinfo/emc-users >>>>> -- >>>>> >>>>> Thanks >>>>> >>>>> >>>>> Rick Lair >>>>> Superior Roll & Turning LLC >>>>> 399 East Center Street >>>>> Petersburg MI, 49270 >>>>> PH: 734-279-1831 >>>>> FAX: 734-279-1166 >>>>> www.superiorroll.com >>>>> >>>>> >>>>> ------------------------------------------------------------------------------ >>>>> BPM Camp - Free Virtual Workshop May 6th at 10am PDT/1PM EDT >>>>> Develop your own process in accordance with the BPMN 2 standard >>>>> Learn Process modeling best practices with Bonita BPM through live >>>>> exercises >>>>> http://www.bonitasoft.com/be-part-of-it/events/bpm-camp-virtual- >>>>> event?utm_ >>>>> source=Sourceforge_BPM_Camp_5_6_15&utm_medium=email&utm_campaign=VA_SF >>>>> _______________________________________________ >>>>> Emc-users mailing list >>>>> [email protected] >>>>> https://lists.sourceforge.net/lists/listinfo/emc-users >>>> ------------------------------------------------------------------------------ >>>> BPM Camp - Free Virtual Workshop May 6th at 10am PDT/1PM EDT >>>> Develop your own process in accordance with the BPMN 2 standard >>>> Learn Process modeling best practices with Bonita BPM through live >>>> exercises >>>> http://www.bonitasoft.com/be-part-of-it/events/bpm-camp-virtual- >>>> event?utm_ >>>> source=Sourceforge_BPM_Camp_5_6_15&utm_medium=email&utm_campaign=VA_SF >>>> _______________________________________________ >>>> Emc-users mailing list >>>> [email protected] >>>> https://lists.sourceforge.net/lists/listinfo/emc-users >>> -- >>> Thanks >>> >>> >>> Rick Lair >>> Superior Roll & Turning LLC >>> 399 East Center Street >>> Petersburg MI, 49270 >>> PH: 734-279-1831 >>> FAX: 734-279-1166 >>> www.superiorroll.com >>> >> >> ------------------------------------------------------------------------------ >> BPM Camp - Free Virtual Workshop May 6th at 10am PDT/1PM EDT >> Develop your own process in accordance with the BPMN 2 standard >> Learn Process modeling best practices with Bonita BPM through live exercises >> http://www.bonitasoft.com/be-part-of-it/events/bpm-camp-virtual- event?utm_ >> source=Sourceforge_BPM_Camp_5_6_15&utm_medium=email&utm_campaign=VA_SF >> _______________________________________________ >> Emc-users mailing list >> [email protected] >> https://lists.sourceforge.net/lists/listinfo/emc-users > > -- > > Thanks > > > Rick Lair > Superior Roll & Turning LLC > 399 East Center Street > Petersburg MI, 49270 > PH: 734-279-1831 > FAX: 734-279-1166 > www.superiorroll.com > > > ------------------------------------------------------------------------------ > BPM Camp - Free Virtual Workshop May 6th at 10am PDT/1PM EDT > Develop your own process in accordance with the BPMN 2 standard > Learn Process modeling best practices with Bonita BPM through live exercises > http://www.bonitasoft.com/be-part-of-it/events/bpm-camp-virtual- event?utm_ > source=Sourceforge_BPM_Camp_5_6_15&utm_medium=email&utm_campaign=VA_SF > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > Peter Wallace Mesa Electronics (\__/) (='.'=) This is Bunny. Copy and paste bunny into your (")_(") signature to help him gain world domination. ------------------------------------------------------------------------------ BPM Camp - Free Virtual Workshop May 6th at 10am PDT/1PM EDT Develop your own process in accordance with the BPMN 2 standard Learn Process modeling best practices with Bonita BPM through live exercises http://www.bonitasoft.com/be-part-of-it/events/bpm-camp-virtual- event?utm_ source=Sourceforge_BPM_Camp_5_6_15&utm_medium=email&utm_campaign=VA_SF _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
