On Thursday 30 April 2015 18:19:57 N. Christopher Perry wrote: > Have you tried SDP?: SDP-SI.com > > N. Christopher Perry
Thanks Christopher. I got an estimate for a belt & 2 timing pulleys from them about a year ago, but they wanted well over $300. I was tempted to ask if the pulley's were made out of gold, but restrained myself. Even at that price it wasn't quite what I asked for... After that, my thoughts are that they would be about the last line on the list. > > On Apr 30, 2015, at 2:16 PM, Gene Heskett <ghesk...@wdtv.com> wrote: > > > > Greetings all; > > > > I have been snooping around with my google-fu, and coming up a bit > > long. > > > > Long as in the smallest of tese belts with a kevlar backing, is a > > 3/8" wide 3 ribber, 21" long. That is too long for what I am trying > > to do. > > > > What I have, under design but not carved just yet, would be a set of > > pulley's to be used on my toy mill when I remove the whole gearbox > > on the spindle and replace it with something resembling the LMS is > > selling for the mini-mill. But the motor will be the 400 watter I > > took off the lathe when I pout the 1 horse on it, so the motors > > pulley will need an 8mm hub, probably another shop made taperlock, > > while the spindle pulley will need a 30mm hub, possibly taperlock if > > I can find room for it. The two pulleys will be otherwise alike, > > with a 2/1 ratio when the belt is in the reduction grooves, and a > > 1/2 when its in the higher speed grooves, gfiving a variable speed > > range of up to 2500 in low range, and up to 10k in high range from a > > 5k motor. That ought to speed up making pcb's a bit. > > > > Unforch, on the gates site, no real data unless I kill a tree with > > their pdf catalog. Other sites, which obviously stock only the > > popular sizes for automotive useage, do not show anything in the 3 > > rib 3/8" width, shorter that 21". That would put the motor a couple > > inches farther off to the side than I'd like. > > > > Has anyone else found such smallish beasts and can give me a URL? > > > > > > Cheers, Gene Heskett > > -- > > "There are four boxes to be used in defense of liberty: > > soap, ballot, jury, and ammo. Please use in that order." > > -Ed Howdershelt (Author) > > Genes Web page <http://geneslinuxbox.net:6309/gene> > > > > -------------------------------------------------------------------- > >---------- One dashboard for servers and applications across > > Physical-Virtual-Cloud Widest out-of-the-box monitoring support with > > 50+ applications Performance metrics, stats and reports that give > > you Actionable Insights Deep dive visibility with transaction > > tracing using APM Insight. > > http://ad.doubleclick.net/ddm/clk/290420510;117567292;y > > _______________________________________________ > > Emc-users mailing list > > Emc-users@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/emc-users > > ---------------------------------------------------------------------- >-------- One dashboard for servers and applications across > Physical-Virtual-Cloud Widest out-of-the-box monitoring support with > 50+ applications Performance metrics, stats and reports that give you > Actionable Insights Deep dive visibility with transaction tracing > using APM Insight. > http://ad.doubleclick.net/ddm/clk/290420510;117567292;y > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) Genes Web page <http://geneslinuxbox.net:6309/gene> ------------------------------------------------------------------------------ One dashboard for servers and applications across Physical-Virtual-Cloud Widest out-of-the-box monitoring support with 50+ applications Performance metrics, stats and reports that give you Actionable Insights Deep dive visibility with transaction tracing using APM Insight. http://ad.doubleclick.net/ddm/clk/290420510;117567292;y _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
