A 4 1/2" right angle grinder with a cutoff wheel works well for that kind of thing. Also easy to control. A 7 or 9" grinder with a cutoff wheel will be even faster but is a lot heavier and harder to control. Just make sure you wear safety glasse. Ear protection is also a very good idea.
Dave On 5/5/2015 10:00 AM, Przemek Klosowski wrote: >> Biggest problem ATM is the ultra cheap hacksaw blades that came with a >> Dewalt Sawzall. I have about 150 deck screws around the edges that are >> holding the balister sticks, which need about the inner end 7/8" >> removed, and with these blades each one seems to be good for 3, maybe 4 >> screws cut off. So I gotta find some better blades. Lots better if I >> can find them. A web search just showed more of these. :( At the cost >> of the blades, that is about a dollar a screw cut off. Ouch! >> > The screws are about the worst thing you can put your blades on: hard and > jagged. > > Don't cut them with a blade: they are so hard that you should be able to > snap them off (put them in a vise and whack the extra part off with a > hammer). If they are soft enough to bend, score them with a grinder and do > a forth-and-back stress fracture. > ------------------------------------------------------------------------------ > One dashboard for servers and applications across Physical-Virtual-Cloud > Widest out-of-the-box monitoring support with 50+ applications > Performance metrics, stats and reports that give you Actionable Insights > Deep dive visibility with transaction tracing using APM Insight. > http://ad.doubleclick.net/ddm/clk/290420510;117567292;y > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users --- This email has been checked for viruses by Avast antivirus software. http://www.avast.com ------------------------------------------------------------------------------ One dashboard for servers and applications across Physical-Virtual-Cloud Widest out-of-the-box monitoring support with 50+ applications Performance metrics, stats and reports that give you Actionable Insights Deep dive visibility with transaction tracing using APM Insight. http://ad.doubleclick.net/ddm/clk/290420510;117567292;y _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
