I had 0.00001 in the entry.
On 5/11/2015 12:43 PM, andy pugh wrote: > On 11 May 2015 at 17:05, Rick Lair <r...@superiorroll.com> wrote: >> I thought that the deadband value would only effect the positioning when >> the axis was idle, not while in motion? > No, it is the position error required before there is any output from the PID. > Out of interest, how big was the tiny value? > I don't think you would expect to need deadband with resolvers, though > my experience is limited to one machine. > -- Thanks Rick Lair Superior Roll & Turning LLC 399 East Center Street Petersburg MI, 49270 PH: 734-279-1831 FAX: 734-279-1166 www.superiorroll.com ------------------------------------------------------------------------------ One dashboard for servers and applications across Physical-Virtual-Cloud Widest out-of-the-box monitoring support with 50+ applications Performance metrics, stats and reports that give you Actionable Insights Deep dive visibility with transaction tracing using APM Insight. http://ad.doubleclick.net/ddm/clk/290420510;117567292;y _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users