On 14 June 2015 at 21:08, Marius Alksnys <[email protected]> wrote: > Does anybody know BLDC motor drivers suitable to run BLDC servo motor: > rated at 230W, 48V, 8 poles, 3000 RPM?
Both Pico and Mesa do drivers that are suitable. http://pico-systems.com/osc2.5/catalog/product_info.php?cPath=3&products_id=20 http://store.mesanet.com/index.php?route=product/product&filter_name=7i39&product_id=145 The Anaheim ones should work too, but note that the Pico one is rated to higher voltage and the Mesa one is actually a dual-motor driver. However it needs to be connected to a Mesa FPGA card to operate as the 3-phase PWM signals are created by the FPGA, not the drive. > I want to control the motor using one PWM and three hall signals or > three phase PWM. > Has anybody succeeded running some simple BLDC drivers for that? I built my own (300V drive) using an IRAMS module. -- atp If you can't fix it, you don't own it. http://www.ifixit.com/Manifesto ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
