dont forget you also need a pulse on enc a as well as index for threading , unless of course your using a commercial encoder and change encoder type to 1 , and change the encoder to ttl by the 3 jumpers on the 7i76 for that particular channel . you can tie the same sig to index and enc a
hope everones OK , i';m back On 6 July 2015 at 22:01, Tom Easterday <[email protected]> wrote: > Ah, I found this thread which explains Chris’ message and that we are not > the only ones who have this issue… > > http://www.linuxcnc.org/index.php/english/forum/38-general-linuxcnc-questions/29281-threading-g76-with-spindle-in-reverse > < > http://www.linuxcnc.org/index.php/english/forum/38-general-linuxcnc-questions/29281-threading-g76-with-spindle-in-reverse > > > > > On Jul 5, 2015, at 12:34 PM, Chris Radek <[email protected]> wrote: > > > > On Sun, Jul 05, 2015 at 12:17:32PM -0400, Tom Easterday wrote: > >> > >> opposite direction in the turret and I use M3, and this is the > >> tool that I was using when G76 fails. Could the spindle direction > >> effect the index pulse? > > > > When in M3, the motion.spindle-revs should increase by 1.0 for each > > turn of the spindle. When in M4, it should decrease. > > > > > ------------------------------------------------------------------------------ > > Don't Limit Your Business. Reach for the Cloud. > > GigeNET's Cloud Solutions provide you with the tools and support that > > you need to offload your IT needs and focus on growing your business. > > Configured For All Businesses. Start Your Cloud Today. > > https://www.gigenetcloud.com/ > > _______________________________________________ > > Emc-users mailing list > > [email protected] > > https://lists.sourceforge.net/lists/listinfo/emc-users > > > ------------------------------------------------------------------------------ > Don't Limit Your Business. Reach for the Cloud. > GigeNET's Cloud Solutions provide you with the tools and support that > you need to offload your IT needs and focus on growing your business. > Configured For All Businesses. Start Your Cloud Today. > https://www.gigenetcloud.com/ > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ Don't Limit Your Business. Reach for the Cloud. GigeNET's Cloud Solutions provide you with the tools and support that you need to offload your IT needs and focus on growing your business. Configured For All Businesses. Start Your Cloud Today. https://www.gigenetcloud.com/ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
